The DS2755 high-precision battery fuel gauge is a data-acquisition and information-storage device tailored for cost-sensitive and space-constrained 1cell Li+/polymer battery-pack applications. The DS2755 provides the key hardware components required to accurately estimate remaining capacity by integrating low-power, precision measurements of temperature, vol.
Snapshot Mode Allows Instantaneous Power Measurement Accurate Current Measurement for Coulomb Counting (Current Accumulation) - 2% ±4μV over ±64mV Input Range - 2% ±200μA over ±3.2A Range Using a 20mΩ Sense Resistor Current Measurement - 9-Bit Bidirectional Snapshot Measurement - 12-Bit Bidirectional Average Updated Every 88ms - 15-Bit Bidirectional Average Updated Every 2.8s Voltage Measurement - 9-Bit Snapshot Measurement - 10-Bit Measurement Updated Every 4ms Temperature Measurement - 10-Bit Measurement, 0.125°C Resolution Using Integrated Sensor Host Alerted When Accumulated Current or.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS275 |
Dallas Semiconducotr |
Line-Powered RS-232 Transceiver Chip | |
2 | DS2751 |
Maxim Integrated Products |
Multichemistry Fuel Garge | |
3 | DS27510 |
Sanyo |
Color TV Manual | |
4 | DS2756 |
Maxim Integrated Products |
High-Accuracy Battery Fuel Gauge | |
5 | DS2703 |
Dallas Semiconductor |
SHA-1 Battery Pack Authentication IC | |
6 | DS2704 |
Maxim Integrated Products |
1280-Bit EEPROM | |
7 | DS2705 |
Maxim Integrated Products |
SHA-1 Authentication Master | |
8 | DS2710 |
Maxim |
Single-Cell NiMH Charger | |
9 | DS2711 |
Maxim Integrated Products |
(DS2711 / DS2712) Loose Cell NiMH Chargers | |
10 | DS2712 |
Maxim Integrated Products |
(DS2711 / DS2712) Loose Cell NiMH Chargers | |
11 | DS2714 |
Maxim Integrated Products |
Quad Loose Cell NiMH Charger | |
12 | DS2715 |
Dallas Semiconducotr |
NiMH Battery Pack Charge Controller |