The DS2715 is well suited for cost-sensitive charger applications where the battery is either internal or in a unique battery pack. It has been optimized for safe reliable charging of 1 to10 NiMH cells in series. The DS2715 has an internal gain block that can be selected as either a comparator or transconductance amplifier for charge current regulation. The .
§ § § § § § § § § Charges 1 to 10 NiMH Cells Fast Charges up to a 2C Rate Pre-Charge and Top-Off Charge Modes Help Cell Conditioning Load Detection Allows the DS2715 to Enter Low Power Sleep Mode (Less than 10µA) while the Cell Pack is Discharged dT/dt Charge Termination Eliminates Cell Charge Stress Monitors Voltage, Temperature, and Time for Safety and Secondary Termination Regulates Current through Either Linear Control or Switch-Mode Control LED Outputs Display Charge State Small 16-Pin SO Package + Denotes lead-free package. OPERATIONAL DIAGRAM CHARGE SOURCE/LOAD Vch Vdd Vbatt Divide b.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS2710 |
Maxim |
Single-Cell NiMH Charger | |
2 | DS2711 |
Maxim Integrated Products |
(DS2711 / DS2712) Loose Cell NiMH Chargers | |
3 | DS2712 |
Maxim Integrated Products |
(DS2711 / DS2712) Loose Cell NiMH Chargers | |
4 | DS2714 |
Maxim Integrated Products |
Quad Loose Cell NiMH Charger | |
5 | DS2703 |
Dallas Semiconductor |
SHA-1 Battery Pack Authentication IC | |
6 | DS2704 |
Maxim Integrated Products |
1280-Bit EEPROM | |
7 | DS2705 |
Maxim Integrated Products |
SHA-1 Authentication Master | |
8 | DS2720 |
Dallas Semiconducotr |
Efficient/ Addressable Single-Cell Rechargeable Lithium Protection IC | |
9 | DS2726 |
Maxim Integrated |
5-Cell to 10-Cell Li+ Protector | |
10 | DS2731 |
Maxim |
Cache-Memory Battery-Backup Management | |
11 | DS2740 |
Maxim Integrated |
High-Precision Coulomb Counter | |
12 | DS2741 |
Maxim Integrated Products |
Current Monitor and Accumulator |