Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
. PIN DESCRIPTION OVD- 1-Wire Bus Speed Select PIO - Programmable I/O Pin SNS - Sense Resistor Input IS2 - Current-Sense Input IS1 - Current-Sense Input VSS - Device Ground, Current-Sense Resistor Return DQ - Data Input/Output VDD - Power-Supply Input (2.7V to 5.5V) 1-Wire is a registered trademark of Dallas Semiconductor. 1 of 16 051805 Table 1. ORDERI.
15-Bit Bidirectional Current Measurement (DS2740U) 1.56μV LSB and ±51.2mV Dynamic Range 78μA LSB and ±2.56A Dynamic Range with External 20mΩ Sense Resistor (RSNS) 156μA LSB and ±5.12A Dynamic Range with External 10mΩ Sense Resistor (RSNS) 13-Bit Bidirectional Current Measurement (DS2740BU) 6.25μV LSB and ±51.2mV Dynamic Range 312μA LSB and ±2.56A Dynamic Range with External 20mΩ Sense Resistor (RSNS) 625μA LSB and ±5.12A Dynamic Range with External 10mΩ Sense Resistor (RSNS) Analog Input Filter (IS1, IS2) Extends Dynamic Range for Pulse-Load Applications Current Accumulatio.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | DS2741 |
Maxim Integrated Products |
Current Monitor and Accumulator |
|
| 2 | DS2745 |
Maxim Integrated Products |
Low-Cost I2C Battery Monitor |
|
| 3 | DS2746 |
Manix |
Low-Cost 2-Wire Battery Monitor |
|
| 4 | DS2703 |
Dallas Semiconductor |
SHA-1 Battery Pack Authentication IC |
|
| 5 | DS2704 |
Maxim Integrated Products |
1280-Bit EEPROM |
|
| 6 | DS2705 |
Maxim Integrated Products |
SHA-1 Authentication Master |
|
| 7 | DS2710 |
Maxim |
Single-Cell NiMH Charger |
|
| 8 | DS2711 |
Maxim Integrated Products |
(DS2711 / DS2712) Loose Cell NiMH Chargers |
|
| 9 | DS2712 |
Maxim Integrated Products |
(DS2711 / DS2712) Loose Cell NiMH Chargers |
|
| 10 | DS2714 |
Maxim Integrated Products |
Quad Loose Cell NiMH Charger |
|
| 11 | DS2715 |
Dallas Semiconducotr |
NiMH Battery Pack Charge Controller |
|
| 12 | DS2720 |
Dallas Semiconducotr |
Efficient/ Addressable Single-Cell Rechargeable Lithium Protection IC |
|