The DS2153Q T1 Single-Chip Transceiver (SCT) contains all of the necessary functions for connection to E1 lines. The onboard clock/data recovery circuitry coverts the AMI/HDB3 E1 waveforms to a NRZ serial stream. The DS2153 automatically adjusts to E1 22 AWG (0.6 mm) twisted-pair cables from 0 to 1.5 km. The device can generate the necessary G.703 waveshape.
Complete E1(CEPT) PCM-30/ISDN-PRI transceiver functionality Onboard line interface for clock/data recovery and waveshaping 32-bit or 128-bit jitter attenuator Generates line build-outs for both 120-ohm and 75-ohm lines Frames to FAS, CAS, and CRC4 formats Dual onboard two-frame elastic store slip buffers that can connect to backplanes up to 8.192 MHz 8-bit parallel control port that can be used on either multiplexed or non-multiplexed buses Extracts and inserts CAS signaling Detects and generates Remote and AIS alarms Programmable output clocks for Fractional E1, H0, and H12 applications Fully.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS2151Q |
Dallas Semiconducotr |
T1 Single-Chip Transceiver | |
2 | DS2152 |
Dallas Semiconducotr |
Enhanced T1 Single-Chip Transceiver | |
3 | DS2154 |
Dallas Semiconducotr |
Enhanced E1 Single Chip Transceiver | |
4 | DS2155 |
Dallas Semiconducotr |
T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface | |
5 | DS21552 |
Maxim Integrated |
T1 Single-Chip Transceivers | |
6 | DS2156 |
Dallas Semiconducotr |
T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface | |
7 | DS215W |
AiT Components |
SCHOTTKY BARRIER RECTIFIERS | |
8 | DS215W |
Jingdao Microelectronics |
Surface Mount Schottky Barrier Rectifier | |
9 | DS215W |
Rectron |
Surface Mount Schottky Barrier Rectifier | |
10 | DS215W |
BLUE ROCKET ELECTRONICS |
Surface Mount Schottky Barrier Rectifier | |
11 | DS21054E |
Microchip Technology |
16K 1.8V I2C SERIAL EEPROM | |
12 | DS2106SY |
Dynex Semiconductor |
Rectifier Diode |