The DS2151Q T1 Single-Chip Transceiver (SCT) contains all of the necessary functions for connection to T1 lines whether they be DS-1 long haul or DSX-1 short haul. The clock recovery circuitry automatically adjusts to T1 lines from 0 feet to over 6000 feet in length. The device can generate both DSX-1 line build outs as well as CSU build outs of -7.5 dB, -1.
§ § § § § § § § § § § § § § § § § § Complete DS1/ISDN-PRI transceiver functionality Line interface can handle both long- and short-haul trunks 32-bit or 128-bit jitter attenuator Generates DSX-1 and CSU line build outs Frames to D4, ESF, and SLC-96R formats Dual onboard two-frame elastic store slip buffers that connect to backplanes up to 8.192 MHz 8-bit parallel control port that can be used on either multiplexed or non-multiplexed buses Extracts and inserts Robbed-Bit signaling Detects and generates yellow and blue alarms Programmable output clocks for Fractional T1 Fully independent transmi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DS2152 |
Dallas Semiconducotr |
Enhanced T1 Single-Chip Transceiver | |
2 | DS2153Q |
Dallas Semiconducotr |
E1 Single-Chip Transceiver | |
3 | DS2154 |
Dallas Semiconducotr |
Enhanced E1 Single Chip Transceiver | |
4 | DS2155 |
Dallas Semiconducotr |
T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface | |
5 | DS21552 |
Maxim Integrated |
T1 Single-Chip Transceivers | |
6 | DS2156 |
Dallas Semiconducotr |
T1/E1/J1 Single-Chip Transceiver TDM/UTOPIA II Interface | |
7 | DS215W |
AiT Components |
SCHOTTKY BARRIER RECTIFIERS | |
8 | DS215W |
Jingdao Microelectronics |
Surface Mount Schottky Barrier Rectifier | |
9 | DS215W |
Rectron |
Surface Mount Schottky Barrier Rectifier | |
10 | DS215W |
BLUE ROCKET ELECTRONICS |
Surface Mount Schottky Barrier Rectifier | |
11 | DS21054E |
Microchip Technology |
16K 1.8V I2C SERIAL EEPROM | |
12 | DS2106SY |
Dynex Semiconductor |
Rectifier Diode |