The DRV8809/DRV8810 provides an integrated motor driver solution. The chip has four H-bridges internally and is configurable to eight different modes of combination motor driver control. The output driver block for each H-bridge consists of N-channel power MOSFETs configured as full Hbridges to drive the motor windings. The stepper motor control has a 16-ste.
•1 Configurable to Eight Modes of Combination Motor Driver
– Bipolar Stepper Motor Driver
– 16-Step Current-Mode Control
– 800-mA Average Output Current as Stepper Motor Drive
– DC Motor Driver
– 800-mA Maximum Continuous Current and 8-A/500-ns or 3-A/100-ms Peak Current for Each DC Motor Drive
– Low ON resistance Rds(ON) = 0.55 Ω at TJ = 25°C (Typ)
• Three Integrated DC-DC Converters
– On/Off Selectable Using C_SELECT Pin and Serial Interface
– Outputs Programmable With External Resistor Network From 1.5 V to VDIN × 0.8
– 1.5-A Output Capability for All Three Channels
• 7-V to 40-V Operating .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DRV8800 |
Texas Instruments |
DMOS Full-Bridge Motor Drivers | |
2 | DRV8801 |
Texas Instruments |
DMOS Full-Bridge Motor Drivers | |
3 | DRV8801-Q1 |
Texas Instruments |
DMOS Full-Bridge Motor Driver | |
4 | DRV8801A-Q1 |
Texas Instruments |
DMOS Full-Bridge Motor Driver | |
5 | DRV8802 |
Texas Instruments |
DC Motor Driver | |
6 | DRV8802-Q1 |
Texas Instruments |
Automotive DC Motor-Driver | |
7 | DRV8803 |
Texas Instruments |
Quad Low-Side Driver | |
8 | DRV8804 |
Texas Instruments |
Quad Serial Interface Low-Side Driver | |
9 | DRV8805 |
Texas Instruments |
Unipolar Stepper Motor Driver | |
10 | DRV8806 |
Texas Instruments |
Quad Serial Interface Low-Side Driver | |
11 | DRV8808 |
Texas Instruments |
Combination Motor Driver | |
12 | DRV8810 |
Texas Instruments |
Combination Motor Driver |