The DRV8808 device provides the integrated motor driver solution for printers. The chip has three full Hbridges and three buck DC-DC converters. The output driver block for each consists of Nchannel power MOSFETs configured as full Hbridges to drive the motor windings. The device can be configured to use internal or external current sense for winding current.
•1 Three DC Motor Drivers
– Up to 2.5-A Current Chopping
– Low Typical ON Resistance (RDSON = 0.5 Ω at TJ = 25°C)
• Three Integrated DC-DC Converters
– ON/OFF Selectable Using CSELECT Pin and Serial Interface
– Outputs Configurable With External Resistor Network From 1 V to 90% of VM Capability for All Three Channels
– 1.35-A Output Capability for All Three Channels
• One Integrated LDO Regulator
– Output Configurable With External Resistor Network from 1 V to 2.5 V
– 550-mA Output Capability
• 7-V to 40-V Operating Range
• Serial Interface for Communications
• Thermally Enhanced Surface-Mount.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DRV8800 |
Texas Instruments |
DMOS Full-Bridge Motor Drivers | |
2 | DRV8801 |
Texas Instruments |
DMOS Full-Bridge Motor Drivers | |
3 | DRV8801-Q1 |
Texas Instruments |
DMOS Full-Bridge Motor Driver | |
4 | DRV8801A-Q1 |
Texas Instruments |
DMOS Full-Bridge Motor Driver | |
5 | DRV8802 |
Texas Instruments |
DC Motor Driver | |
6 | DRV8802-Q1 |
Texas Instruments |
Automotive DC Motor-Driver | |
7 | DRV8803 |
Texas Instruments |
Quad Low-Side Driver | |
8 | DRV8804 |
Texas Instruments |
Quad Serial Interface Low-Side Driver | |
9 | DRV8805 |
Texas Instruments |
Unipolar Stepper Motor Driver | |
10 | DRV8806 |
Texas Instruments |
Quad Serial Interface Low-Side Driver | |
11 | DRV8809 |
Texas Instruments |
Combination Motor Driver | |
12 | DRV8810 |
Texas Instruments |
Combination Motor Driver |