The DLP3034-Q1 automotive DMD is primarily targeted for transparent window display applications. This chipset can be coupled with 405-nm illumination sources (e.g. LEDs or lasers) in an optical projection system to project onto windows embedded with emissive phosphor films. When these transparent emissive films are excited with 405-nm light from a DLP3034-Q1.
•1 Automotive qualified
–
–40°C to 105°C operating temperature range for DMD array
• Supports 405-nm illumination sources
• 0.3-inch diagonal micromirror array
– 7.6-µm micromirror pitch
– ±12° micromirror tilt angle (relative to flat state)
– Side illumination for optimized efficiency
• WVGA (864 × 480) resolution
• Polarization independent spatial light modulator
– Compatible with LED or laser light sources
• Low-power consumption: 105-mW (typical)
• Operating temperature range:
–40°C to 105°C
• Hermetic package with 2.5°C/W thermal efficiency
• JTAG boundary scan to allow in-system validati.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DLP3030-Q1 |
Texas Instruments |
0.3-Inch WVGA DMD | |
2 | DLP3000 |
Texas Instruments |
0.3 WVGA Series 220 DMD | |
3 | DLP3010 |
Texas Instruments |
0.3 720p DMD | |
4 | DLP3021-Q1 |
Texas Instruments |
0.3-Inch WVGA DMD | |
5 | DLP31DN131ML4 |
Murata |
Chip Common Mode Choke Coil | |
6 | DLP31DN201ML4 |
Murata |
Chip Common Mode Choke Coil | |
7 | DLP31DN321ML4 |
Murata |
Chip Common Mode Choke Coil | |
8 | DLP31DN441ML4 |
Murata |
Chip Common Mode Choke Coil | |
9 | DLP31DN900ML4 |
Murata |
Chip Common Mode Choke Coil | |
10 | DLP31SN121ML2 |
Murata |
Chip Common Mode Choke Coil | |
11 | DLP31SN221ML2 |
Murata |
Chip Common Mode Choke Coil | |
12 | DLP31SN551ML2 |
Murata |
Chip Common Mode Choke Coil |