The DLP3021-Q1 Automotive DMD is primarily targeted for automotive exterior light control and display applications, such as ground projection with the ability to display dynamic content. Ground projections can help facilitate vehicle to pedestrian (V2P) communication, such as back up and door open warnings, in addition to orchestrating vehicle communication .
•1 Automotive qualified
• 0.3-inch diagonal micromirror array
– 7.6-µm micromirror pitch
– ±12° micromirror tilt angle (relative to flat state)
– Side illumination for reduced system size
• WVGA (864 × 480) input resolution
• Polarization independent spatial light modulator
• Compatible with LED or laser light sources
• Low-power consumption: 255 mW (maximum)
• Operating temperature range:
–40°C to 105°C
• Hermetic package
• JTAG boundary scan to allow in-system validation
• Compatible with the DLPC120-Q1 automotive DMD controller
• 80-MHz DDR DMD interface
2 Applications
• Automotive small li.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | DLP3000 |
Texas Instruments |
0.3 WVGA Series 220 DMD | |
2 | DLP3010 |
Texas Instruments |
0.3 720p DMD | |
3 | DLP3030-Q1 |
Texas Instruments |
0.3-Inch WVGA DMD | |
4 | DLP3034-Q1 |
Texas Instruments |
0.3-Inch WVGA DMD | |
5 | DLP31DN131ML4 |
Murata |
Chip Common Mode Choke Coil | |
6 | DLP31DN201ML4 |
Murata |
Chip Common Mode Choke Coil | |
7 | DLP31DN321ML4 |
Murata |
Chip Common Mode Choke Coil | |
8 | DLP31DN441ML4 |
Murata |
Chip Common Mode Choke Coil | |
9 | DLP31DN900ML4 |
Murata |
Chip Common Mode Choke Coil | |
10 | DLP31SN121ML2 |
Murata |
Chip Common Mode Choke Coil | |
11 | DLP31SN221ML2 |
Murata |
Chip Common Mode Choke Coil | |
12 | DLP31SN551ML2 |
Murata |
Chip Common Mode Choke Coil |