ordering information The ’ACT174 devices are positive-edge-triggered D-type flip-flops with a direct clear (CLR) input and are designed for 4.5-V to 5.5-V VCC operation. Information at the data (D) inputs that meets the setup time requirements is transferred to the outputs on the positive-going edge of the clock (CLK) pulse. Clock triggering occurs at a part.
edge of the clock (CLK) pulse. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going edge of CLK. When CLK is at either the high or low level, the D input has no effect at the output.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE PART NUMBER
TOP-SIDE MARKING
PDIP
– E
Tube
CD74ACT174E
CD74ACT174E
–55°C to 125°C SOIC
– M
Tube Tape and reel
CD74ACT174M CD74ACT174M96
ACT174M
CDIP
– F
Tube
CD54ACT174F3A
CD54ACT174F3A
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design gu.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | CD54ACT109 |
Texas Instruments |
DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS | |
2 | CD54ACT112 |
Texas Instruments |
DUAL J-K NEGATIVE-EDGE-TRIGGERED FLIP-FLOPS | |
3 | CD54ACT138 |
Texas Instruments |
3-LINE TO 8-LINE DECODERS/DEMULTIPLEXERS | |
4 | CD54ACT139 |
Texas Instruments |
DUAL 2-LINE TO 4-LINE DECODERS/DEMULTIPLEXERS | |
5 | CD54ACT151 |
Texas Instruments |
8-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS | |
6 | CD54ACT153 |
Texas Instruments |
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS | |
7 | CD54ACT161 |
Texas Instruments |
4-BIT SYNCHRONOUS BINARY COUNTERS | |
8 | CD54ACT163 |
Texas Instruments |
4-BIT SYNCHRONOUS BINARY COUNTERS | |
9 | CD54ACT164 |
Texas Instruments |
8-Bit Serial-In/Parallel-Out Shift Register | |
10 | CD54ACT191 |
Texas Instruments |
Presettable Synchronous 4-Bit Binary Up/Down Counter | |
11 | CD54ACT00 |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NAND GATES | |
12 | CD54ACT00F3A |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NAND GATES |