BD3823FV is a low-noise (3.2ҏμVrms), low distortion (0.0015%), 5ch selector, incorporating a resistor-ladder type volume. Because of a wide power supply voltage range (7V to 14.5V), BD3823FV can meet a wide input voltage (to 4.5 Vms), and high S/N can be achieved. In addition, the built-in volume does not add any distortion ratio characteristics, even when t.
1) A resistor-ladder type volume circuit is with a low distortion ratio (0.0015% with volume set to
–6dB) and low noise (3.2 ȝVrms with volume set to -6dB).
2) By grouping sound input terminals with output terminals, the PCB layout is reduced. 3) Small package SSOP - B20 achieves good crosstalk characteristicss (-110 dB). 4) The use of Bi-CMOS process enables low current consumption and energy saving design.
Because of low current consumption, BD3823FV has the advantage in quality over the scaling down of the internal regulators and heat controls.
ƔApplications DVD recorders
ƔAbsolute maximu.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | BD3822FS |
Rohm |
NTSC-PAL Audio I/O | |
2 | BD3824FS |
Rohm |
NTSC-PAL Audio I/O | |
3 | BD3824FS |
Rohm |
Sound processor for DVD player | |
4 | BD3825FS |
Rohm |
PAL Audio I/O Interface | |
5 | BD3826FS |
Rohm |
Audio signal switcher IC | |
6 | BD3827K |
Rohm |
SCF built-in sound processor | |
7 | BD38-xx |
Facon |
Single Phase Moulded Bridges 0.8 Amp ro 1.5 Amp | |
8 | BD380 |
Fairchild Semiconductor |
PNP Epitaxial Silicon Transistor | |
9 | BD380 |
INCHANGE |
PNP Transistor | |
10 | BD3801FS |
Rohm |
SCF built-in sound processor | |
11 | BD3805F |
Rohm |
Sound Processor for Car Audio | |
12 | BD3811K1 |
Rohm |
5.1ch Sound Processor |