Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
ATS276/277 are integrated Hall sensors with output drivers, mainly designed for electronic commutation of brush-less DC Fan. This IC internally includes the regulator, protecting diode, Hall plate, amplifier, comparator, and a pair of complementary open-collector outputs (DO, DOB). While the magnetic flux density (B) is larger than operate point (Bop), DO wi.
- On-chip Hall sensor with two different sensitivity and hysteresis settings for ATS276/277 - 3.5V to 20V operating voltage - 400mA (avg) output sink current - Build-in protecting diode only for chip reverse power connecting - -20°C to 85°C operating temperature - Low profile 4 pin SIP package ATS276/277 General Description ATS276/277 are integrated Hall sensors with output drivers, mainly designed for electronic commutation of brush-less DC Fan. This IC internally includes the regulator, protecting diode, Hall plate, amplifier, comparator, and a pair of complementary open-collector output.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | ATS276 |
ETC |
Complementary Output Hall Effect Latch |
|
| 2 | ATS278 |
Anachip |
Two Phase Hall Effect Latch |
|
| 3 | ATS20 |
Andiglog |
LOW-VOLTAGE ULTRA-LOW-POWER TEMPERATURE SENSOR |
|
| 4 | ATS22D75Q |
Schneider |
soft starter |
|
| 5 | ATS25 |
Aerotech |
Manual Linear Positioning Stage |
|
| 6 | ATS2501 |
Actions |
Third generation single-chip highly-integrated digital music system solution |
|
| 7 | ATS2503 |
Actions |
Third generation single-chip highly-integrated digital music system solution |
|
| 8 | ATS2505 |
Actions |
Single-Chip Highly-Integrated Digital Music System Solution |
|
| 9 | ATS266 |
ETC |
High Voltage Hall Effect Latch |
|
| 10 | ATS2805A |
Actions |
Hardware Design Guide |
|
| 11 | ATS-1 |
MTRONPTI |
(ATS-1/-2) Crystals |
|
| 12 | ATS-2 |
MTRONPTI |
(ATS-1/-2) Crystals |
|