The aTS20 is a precision CMOS temperature sensor that provides a cost-effective solution for spaceconstrained applications. The output voltage ramp of the aTS20 has a negative slope of -11.77mV/°C. With a supply voltage of 2.4V to 6V, the aTS20 is accurate to ± 2°C at 25°C, and to ± 3°C over the range of −40°C to 125°C. Reducing the supply voltage to 2.4V do.
•
•
•
•
•
•
•
•
•
•
actual part marking below
Extremely Low Power Precision Calibrated to ±2°C at 25°C Ultra Low Operating Current : ≤ 12μA Temperature Range: -40°C to 125°C Linear Output Ramp: -11.77mV/°C Output Ramp is Calibrated to Degrees Celsius Low Self Heating: 0.01°C typical in still air Accuracy (°C) Uses a Single Positive Supply Operating Voltage Range: +2.4V to +6V Non-linearity: ≤ 0.8°C
3 2 1 0 -1 -2 -3 -40 -20 0 20
25 125 upper spec limit lower spec limit
Accuracy vs Temperature
Applications
•
•
•
•
•
•
•
•
• Cellular Telephones Computers Battery Management FAX Machines/Printer.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ATS22D75Q |
Schneider |
soft starter | |
2 | ATS25 |
Aerotech |
Manual Linear Positioning Stage | |
3 | ATS2501 |
Actions |
Third generation single-chip highly-integrated digital music system solution | |
4 | ATS2503 |
Actions |
Third generation single-chip highly-integrated digital music system solution | |
5 | ATS2505 |
Actions |
Single-Chip Highly-Integrated Digital Music System Solution | |
6 | ATS266 |
ETC |
High Voltage Hall Effect Latch | |
7 | ATS276 |
ETC |
Complementary Output Hall Effect Latch | |
8 | ATS277 |
ETC |
Complementary Output Hall Effect Latch | |
9 | ATS278 |
Anachip |
Two Phase Hall Effect Latch | |
10 | ATS2805A |
Actions |
Hardware Design Guide | |
11 | ATS-1 |
MTRONPTI |
(ATS-1/-2) Crystals | |
12 | ATS-2 |
MTRONPTI |
(ATS-1/-2) Crystals |