AT89C5130A/31A-M is a high-performance Flash version of the 80C51 single-chip 8-bit microcontrollers with full speed USB functions. AT89C5130A/31A-M features a full-speed USB module compatible with the USB specifications Version 1.1 and 2.0. This module integrates the USB transceivers with a 3.3V voltage regulator and the Serial Interface Engine (SIE) with D.
• 80C52X2 Core (6 Clocks per Instruction)
– Maximum Core Frequency 48 MHz in X1 Mode, 24 MHz in X2 Mode
– Dual Data Pointer
– Full-duplex Enhanced UART (EUART)
– Three 16-bit Timer/Counters: T0, T1 and T2
– 256 Bytes of Scratchpad RAM
• 16/32-Kbyte On-chip Flash EEPROM In-System Programming through USB
– Byte and Page (128 bytes) Erase and Write
– 100k Write Cycles
• 3-KbyteFlash EEPROM for Bootloader
– Byte and Page (128 bytes) Erase and Write
– 100k Write Cycles
• 1-Kbyte EEPROM Data (
– Byte and Page (128 bytes) Erase and Write
– 100k Write Cycles
• On-chip Expanded RAM (ERAM): 1024 Bytes
•.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AT89C5131A-L |
ATMEL |
8-bit Flash Microcontroller | |
2 | AT89C5131A |
ATMEL Corporation |
USB Microcontrollers | |
3 | AT89C5131 |
ATMEL Corporation |
8-bit Flash Microcontroller | |
4 | AT89C5130A-M |
ATMEL Corporation |
8-bit Flash Microcontroller | |
5 | AT89C5132 |
ATMEL Corporation |
(AT83C5132 / AT89C5132) Usb C51-based Microcontroller | |
6 | AT89C51 |
ATMEL |
8-Bit Microcontroller | |
7 | AT89C5115 |
ATMEL Corporation |
Low Pin Countl 8-bit Microcontroller | |
8 | AT89C5121 |
ATMEL Corporation |
8-bit Microcontroller | |
9 | AT89C5122 |
ATMEL Corporation |
(AT8xx512x) Smart Card Reader ICs | |
10 | AT89C51AC2 |
ATMEL Corporation |
Enhanced 8-bit Microcontroller | |
11 | AT89C51AC3 |
ATMEL Corporation |
Enhanced 8-bit Microcontroller | |
12 | AT89C51CC01 |
ATMEL Corporation |
Enhanced 8-bit Microcontroller |