Block Diagram The T89C5115 is a high performance Flash version of the 80C51 single chip 8-bit microcontrollers. It contains a 16-KB Flash memory block for program and data. The 16-KB Flash memory can be programmed either in parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the stan.
• 80C51 Core Architecture
• 256 Bytes of On-chip RAM
• 256 Bytes of On-chip XRAM
• 16K Bytes of On-chip Flash Memory
– Data Retention: 10 Years at 85°C
– Erase/Write Cycle: 100K
• 2K Bytes of On-chip Flash for Bootloader
• 2K Bytes of On-chip EEPROM
– Erase/Write Cycle: 100K
• 14-sources 4-level Interrupts
• Three 16-bit Timers/Counters
• Full Duplex UART Compatible 80C51
• Maximum Crystal Frequency 40 MHz. In X2 Mode, 20 MHz (CPU Core, 40 MHz)
• Three or Four Ports: 16 or 20 Digital I/O Lines
• Two-channel 16-bit PCA
– PWM (8-bit)
– High-speed Output
– Timer and Edge Capture
• Double Data Poi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AT89C51 |
ATMEL |
8-Bit Microcontroller | |
2 | AT89C5121 |
ATMEL Corporation |
8-bit Microcontroller | |
3 | AT89C5122 |
ATMEL Corporation |
(AT8xx512x) Smart Card Reader ICs | |
4 | AT89C5130A-M |
ATMEL Corporation |
8-bit Flash Microcontroller | |
5 | AT89C5131 |
ATMEL Corporation |
8-bit Flash Microcontroller | |
6 | AT89C5131A |
ATMEL Corporation |
USB Microcontrollers | |
7 | AT89C5131A-L |
ATMEL |
8-bit Flash Microcontroller | |
8 | AT89C5131A-M |
ATMEL Corporation |
8-bit Flash Microcontroller | |
9 | AT89C5132 |
ATMEL Corporation |
(AT83C5132 / AT89C5132) Usb C51-based Microcontroller | |
10 | AT89C51AC2 |
ATMEL Corporation |
Enhanced 8-bit Microcontroller | |
11 | AT89C51AC3 |
ATMEL Corporation |
Enhanced 8-bit Microcontroller | |
12 | AT89C51CC01 |
ATMEL Corporation |
Enhanced 8-bit Microcontroller |