The ASSR-41xx Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA .
• Compact Solid-State Bi-directional Signal Switch
• Single and Dual Channel Normally-off Single-Pole-
Single-Throw (SPST) Relay
• 400V Output Withstand Voltage
• 0.12A or 0.24A Current Rating
(See Schematic for ASSR-4111 Connection A and B)
• Low Input Current: CMOS Compatibility
• Low On-Resistance:
5.5Ω Typical for DC-only, 16Ω Typical for AC/DC
• Very High Output Off-state Impedance:
10 Teraohms Typical
• High Speed Switching:
0.1ms (Ton), 0.02ms (Toff ) Typical
• High Transient Immunity: >1kV/µs
• High Input-to-Output Insulation Voltage
(Safety and Regulatory Approvals) - 3750 Vrms for 1 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ASSR-4111 |
AVAGO |
Solid State Relay | |
2 | ASSR-4118 |
AVAGO |
Solid State Relay | |
3 | ASSR-4119 |
AVAGO |
Solid State Relay | |
4 | ASSR-4120 |
AVAGO |
Solid State Relay | |
5 | ASSR-4128 |
AVAGO |
Solid State Relay | |
6 | ASSR-401C |
AVAGO |
Solid State Relay | |
7 | ASSR-402C |
AVAGO |
Solid State Relay | |
8 | ASSR-1218 |
AVAGO |
Solid State Relay | |
9 | ASSR-1218 |
Broadcom |
Solid State Relay | |
10 | ASSR-1219 |
AVAGO |
Solid State Relay | |
11 | ASSR-1219 |
Broadcom |
Solid State Relay | |
12 | ASSR-1228 |
AVAGO |
Solid State Relay |