The Broadcom® ASSR-12XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage that is optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high-voltage MOSFETs. The relay turns on (contact closes) with a minimum inp.
Compact solid-state bidirectional signal switch
Single and dual-channel normally-off Single-Pole-
Single-Throw (SPST) relay
60V output withstand voltage
0.2A or 0.4A current rating
– See schematics for ASSR-1219 Connection A and Connection B
Low input current: CMOS compatibility
Low On-Resistance
– 0.25Ω typical for DC-only
– 1Ω typical for AC/DC
High input-to-output insulation voltage (safety and regulatory approved)
– 3750 Vrms for 1 minute per UL1577
– CSA Component Acceptance
Applications
Telecommunications switching
Data communications
Industrial controls
Medical sys.
The ASSR-12X X S eries c onsists of an AlG aAs infrar ed light-emitting diode (LED) input stage optically coupled to a h.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ASSR-1218 |
AVAGO |
Solid State Relay | |
2 | ASSR-1218 |
Broadcom |
Solid State Relay | |
3 | ASSR-1228 |
AVAGO |
Solid State Relay | |
4 | ASSR-1228 |
Broadcom |
Solid State Relay | |
5 | ASSR-1410 |
Broadcom |
Solid State Relay | |
6 | ASSR-1410 |
AVAGO |
Solid State Relay | |
7 | ASSR-1411 |
Broadcom |
Solid State Relay | |
8 | ASSR-1411 |
AVAGO |
Solid State Relay | |
9 | ASSR-1420 |
Broadcom |
Solid State Relay | |
10 | ASSR-1420 |
AVAGO |
Solid State Relay | |
11 | ASSR-1510 |
AVAGO |
Solid State Relay | |
12 | ASSR-1510 |
Broadcom |
Solid State Relay |