Selected by A9 = VID(11.5–12.5V), CE = OE = A1 = A6 = L, enabling outputs. When A0 is low (VIL) the output data = 52h, a unique Mfr. code for Alliance Semiconductor Flash products. When A0 is high (VIH), DOUT represents the device code for the AS29F200. Selected with CE = OE = L, WE = H. Data is valid in tACC time after addresses are stable, tCE after CE is .
single 5.0V power supply operation for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. A low VCC detector automatically inhibits write operations during power transtitions. The RY/BY pin, DATA polling of DQ7, or toggle bit (DQ6) may be used to detect end of program or erase operations. The device automatically resets to the read mode after program/erase operations are completed. The AS29F200 resists accidental erasure or spurious programming signals resulting from power transitions. Control register archi tecture per.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AS29F010 |
Alliance Semiconductor |
5V 128K x 8 CMOS FLASH EEPROM | |
2 | AS29F010 |
Micross |
128K x 8 FLASH | |
3 | AS29F010 |
Austin Semiconductor |
128K x 8 FLASH | |
4 | AS29F040 |
Austin Semiconductor |
512K x 8 FLASH | |
5 | AS29F040 |
Micross |
512K x 8 FLASH | |
6 | AS29F040 |
Alliance Semiconductor |
5V 512K x 8 CMOS FLASH EEPROM | |
7 | AS2916 |
Si |
Primary Side PWM Controller | |
8 | AS2916 |
Astec Semiconductor |
PWM Controller | |
9 | AS29372 |
Micross Components |
Voltage Regulator | |
10 | AS29372 |
Austin Semiconductor |
LOW-DROPOUT VOLTAGE REGULATOR | |
11 | AS2950 |
Sipex |
(AS2950 / AS2951) 150mA Low Dropout Voltage Regulators | |
12 | AS2951 |
Sipex |
(AS2950 / AS2951) 150mA Low Dropout Voltage Regulators |