The AS2916 is a dual, full featured, pulse width modulation controller. The second controller is intended to run the auxiliary supply. Both controllers share common oscillator and power up logic. Based on an improved AS3842, the AS2916 provides additional features that reduce component count and improve specifications in a wide range of power supply designs..
that reduce component count and improve specifications in a wide range of power supply designs. The added functionality also includes bulk voltage sensing, overvoltage input and soft-start. The PWM function is controlled by the current sense comparator for normal current mode control and a second comparator for voltage mode soft-start. A buffered RAMP signal is available for slope compensation without loading the oscillator. The output stage is a high current totem pole output that sees only 140 ns delay from the PWM comparators. The AS2916 requires less than 25 µA of startup current. The unde.
The AS2916 is a dual, full featured, pulse width modulation controller. The second controller is intended to run the aux.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AS29372 |
Micross Components |
Voltage Regulator | |
2 | AS29372 |
Austin Semiconductor |
LOW-DROPOUT VOLTAGE REGULATOR | |
3 | AS2950 |
Sipex |
(AS2950 / AS2951) 150mA Low Dropout Voltage Regulators | |
4 | AS2951 |
Sipex |
(AS2950 / AS2951) 150mA Low Dropout Voltage Regulators | |
5 | AS2954 |
Sipex Corporation |
250mA Low Drop Out Voltage Regulator | |
6 | AS29F010 |
Alliance Semiconductor |
5V 128K x 8 CMOS FLASH EEPROM | |
7 | AS29F010 |
Micross |
128K x 8 FLASH | |
8 | AS29F010 |
Austin Semiconductor |
128K x 8 FLASH | |
9 | AS29F040 |
Austin Semiconductor |
512K x 8 FLASH | |
10 | AS29F040 |
Micross |
512K x 8 FLASH | |
11 | AS29F040 |
Alliance Semiconductor |
5V 512K x 8 CMOS FLASH EEPROM | |
12 | AS29F200 |
Alliance Semiconductor |
5V 256K x 8/128K x 8 CMOS FLASH EEPROM |