Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The AP3615 is a step-up DC-DC converter based on 1x/1.5x charge pump and low dropout current sink, which helps it maintain the highest efficiency. The AP3615 is specially designed to drive up to 5 WLEDs in backlight display. The AP3615 provides up to 20mA current for each WLED. There are totally 16 steps of current control, which is achieved through a digita.
• Regulated Output Current with ±3% Matching
• Drives up to 5 WLEDs at 20mA Each
• 16 Steps Brightness Control Using Pulse Signal
Dimming
• Wide Operating Voltage Range: 2.8V to 5.5V
• High Operating Frequency: 1MHz
• Auto 1x/1.5x Charge Pump Mode Selection
• Built-in Soft-start
• Output Over Voltage Protection
• Built-in UVLO
• Built-in OTSD
• Operating Temperature Range: -40°C to 85°C
Applications
• Mobile Phone
• PDA
• MP3/4
Jan. 2013 Rev. 1. 3
QFN-3×3-16
Figure 1. Package Type of AP3615
BCD Semiconductor Manufacturing Limited 1
Data Sheet
5 CHANNEL CHARGE PUMP CURRENT SINK FOR LED DRIV.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | AP3612 |
BCD Semiconductor |
Boost Type LED Driver |
|
| 2 | AP3616 |
BCD Semiconductor |
75mA CURRENT SINK |
|
| 3 | AP3600 |
APTech |
1/4 INCH DIAPHRAGM VALVE |
|
| 4 | AP3601N |
Advanced Power Electronics |
P-CHANNEL ENHANCEMENT MODE POWER MOSFET |
|
| 5 | AP3602A |
BCD Semiconductor |
REGULATED CHARGE PUMP |
|
| 6 | AP3602B |
BCD Semiconductor |
REGULATED CHARGE PUMP |
|
| 7 | AP3603 |
AKM |
High Power Dual Output Step-Up DC-DC Controller |
|
| 8 | AP3605 |
BCD Semiconductor |
4-Channel Charge Pump LED Driver |
|
| 9 | AP3606 |
BCD Semiconductor |
4/6 CHANNEL CHARGE PUMP CURRENT SINK |
|
| 10 | AP3607 |
BCD Semiconductor |
4/6 CHANNEL CHARGE PUMP CURRENT SINK |
|
| 11 | AP3608E |
BCD Semiconductor |
EIGHT-CHANNEL CONSTANT CURRENT SINK |
|
| 12 | AP3609 |
BCD Semiconductor |
EIGHT-CHANNEL CONSTANT CURRENT SINK |
|