The AP3606 and AP3607 are step-up DC-DC converters based on 1x/1.5x charge pump and low dropout current sink, which helps them maintain the highest efficiency. The AP3606 is specially designed to drive up to 4 WLEDs in backlight display while the AP3607 is designed for 6 WLEDs. These devices provide up to 20mA current for each WLED. There are totally 16 step.
• Regulated Output Current with ±3% Matching
• Drives up to 4 WLEDs at 20mA Each (AP3606)
Drives up to 6 WLEDs at 20mA Each (AP3607)
• 16 Steps Brightness Control Using Pulse Signal
Dimming
• Wide Operating Voltage Range: 2.7V to 5.5V
• High Operating Frequency: 1MHz
• Auto 1x/1.5x Charge Pump Mode Selection
• Built-in Soft-start
• Output Over Voltage Protection
• Built-in UVLO
• Built-in OTSD
• Operating Temperature Range: -40°C to 85°C
Applications
• Mobile Phone
• PDA
• MP3/4
QFN-3×3-16
Figure 1. Package Type of AP3606/AP3607
Jan. 2013 Rev. 1. 5
BCD Semiconductor Manufacturing Limited 1
.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP3600 |
APTech |
1/4 INCH DIAPHRAGM VALVE | |
2 | AP3601N |
Advanced Power Electronics |
P-CHANNEL ENHANCEMENT MODE POWER MOSFET | |
3 | AP3602A |
BCD Semiconductor |
REGULATED CHARGE PUMP | |
4 | AP3602B |
BCD Semiconductor |
REGULATED CHARGE PUMP | |
5 | AP3603 |
AKM |
High Power Dual Output Step-Up DC-DC Controller | |
6 | AP3605 |
BCD Semiconductor |
4-Channel Charge Pump LED Driver | |
7 | AP3607 |
BCD Semiconductor |
4/6 CHANNEL CHARGE PUMP CURRENT SINK | |
8 | AP3608E |
BCD Semiconductor |
EIGHT-CHANNEL CONSTANT CURRENT SINK | |
9 | AP3609 |
BCD Semiconductor |
EIGHT-CHANNEL CONSTANT CURRENT SINK | |
10 | AP3612 |
BCD Semiconductor |
Boost Type LED Driver | |
11 | AP3615 |
BCD Semiconductor |
5 CHANNEL CHARGE PUMP CURRENT SINK | |
12 | AP3616 |
BCD Semiconductor |
75mA CURRENT SINK |