AP22850 is an integrated P-Channel load switch, which features an adjustable ramp-up and discharge rate that can be set via an external capacitor and a resistor, respectively. In addition, it incorporates a “power good” output to flag when the switch is fully enhanced. The PChannel switch has a typical RDS(ON) of 21mΩ, enabling a current handling capability .
an adjustable ramp-up and discharge rate that can be set via an external capacitor and a resistor, respectively. In addition, it incorporates a “power good” output to flag when the switch is fully enhanced. The PChannel switch has a typical RDS(ON) of 21mΩ, enabling a current handling capability of up to 8A. AP22850 is designed to operate from 4.5V to 11V. The near-zero quiescent supply current makes it ideal for use in battery powered distribution systems where power consumption is a concern. Even as a P-Channel load switch, AP22850 does not require an external gate pull-up resistor, and cons.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP2280 |
Diodes |
Single Channel Slew Rate Controlled Load Switch | |
2 | AP22800 |
Diodes |
5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH | |
3 | AP22802 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
4 | AP22804 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
5 | AP2281 |
Diodes |
Single Slew Rate Controlled Load Switch | |
6 | AP22811 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
7 | AP22814 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
8 | AP22815 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION SWITCH | |
9 | AP22816 |
DIODES |
1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
10 | AP22817 |
DIODES |
1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
11 | AP22818 |
DIODES |
1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
12 | AP2201 |
BCD Semiconductor |
RF ULDO REGULATOR |