The AP22815/615 is a 3A single-channel current-limited high-side power switch with output OVP optimized for USB and other hot-swap applications, which must have overvoltage protection from output to protection the system. The AP22815/615 complies with USB standards and is available with both polarities of Enable input. AP22815 supports fixed current-limited .
Input Voltage Range: 3.0V to 5.5V
40mΩ On-Resistance
Built-In Soft-Start with 2.1ms Typical Rise Time
Fault Report (FLG) with Blanking Time (7ms Typ)
Accurate Adjustable Current Limit, 0.4A to 4.0A (AP22615 Only)
ESD Protection: 2kV HBM, 200V MM
Active Low or Active High Enable
Protection
Output Overvoltage with Auto Recovery
Overcurrent with Auto Recovery
Short-Circuit with Auto Recovery
Overtemperature with Auto Recovery
Output Reverse Voltage/Current Protection
Fast Role Swap Function
Thermally Efficient Low Profile Package
UL Recognized, File Number E322375 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP2281 |
Diodes |
Single Slew Rate Controlled Load Switch | |
2 | AP22811 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
3 | AP22814 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
4 | AP22816 |
DIODES |
1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
5 | AP22817 |
DIODES |
1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
6 | AP22818 |
DIODES |
1.0A/1.5A/2.0A SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
7 | AP2280 |
Diodes |
Single Channel Slew Rate Controlled Load Switch | |
8 | AP22800 |
Diodes |
5V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH | |
9 | AP22802 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
10 | AP22804 |
Diodes |
SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH | |
11 | AP22850 |
Diodes |
10V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH | |
12 | AP2201 |
BCD Semiconductor |
RF ULDO REGULATOR |