The AP1202 series are dual integrated high-side power switch with independent enable and flag functions, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications. The AP1202 series support the following USB requirements: each switch channel supplies up to 500mA as required by USB downstream devices; the switch’s low on-resistance me.
- Compliant to USB specifications - Dual independent switches control - 2.7V to 5.5V input voltage - 500mA minimum continuous current per port - 110mΩ typical on-resistance - 0.75A maximum short circuit current limit - Independent open-drain fault flag pins - 110μA typical on-state supply current - 1μA typical off-state supply current - Output can be forced higher than input (off-state) - Thermal shutdown - 2.4V typical under voltage lockout (UVLO) - 1ms turn-on (soft-start) and fast turn-off - Enable active-high (H) or active-low (L) - 8-pin SOP and PDIP packages General Description The AP12.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | AP1203AGMT-HF |
Advanced Power Electronics |
N-CHANNEL ENHANCEMENT MODE POWER MOSFET | |
2 | AP1203AGMT-HF-3 |
Advanced Power Electronics |
N-CHANNEL ENHANCEMENT MODE POWER MOSFET | |
3 | AP1203GH |
Advanced Power Electronics |
N-CHANNEL ENHANCEMENT MODE POWER MOSFET | |
4 | AP1203GM |
Advanced Power Electronics |
N-CHANNEL ENHANCEMENT MODE POWER MOSFET | |
5 | AP1203GMA |
Advanced Power Electronics |
N-CHANNEL ENHANCEMENT MODE POWER MOSFET | |
6 | AP1203GMT-HF |
Advanced Power Electronics |
N-CHANNEL ENHANCEMENT MODE POWER MOSFET | |
7 | AP1210MP |
Advanced Power Electronics |
2.5A SINK/SOURCE BUS TERMINATION REGULATOR | |
8 | AP1212 |
Diodes Incorporated |
DUAL USB HIGH-SIDE POWER SWITCH | |
9 | AP1212 |
Anachip |
Dual USB High-Side Power Switch | |
10 | AP1231 |
ETC |
300mA Current Voltage Regulators | |
11 | AP1250GH |
Advanced Power Electronics |
1.5A / 3A Bus Termination Regulator | |
12 | AP1250GM |
Advanced Power Electronics |
1.5A / 3A Bus Termination Regulator |