The ADGS1412 contains four independent single-pole/singlethrow (SPST) switches. A serial peripheral interface (SPI) controls the switches. The SPI interface has robust error detection features such as cyclic redundancy check (CRC) error detection, invalid read/write address detection, and SCLK count error detection. It is possible to daisy-chain multiple ADG.
SPI interface with error detection Includes CRC, invalid read/write address, and SCLK count error detection Supports burst mode and daisy-chain mode Industry-standard SPI Mode 0 and Mode 3 interface compatible Guaranteed break-before-make switching allowing external wiring of switches to deliver multiplexer configurations 1.5 Ω typical on resistance at 25°C 0.3 Ω typical on resistance flatness at 25°C 0.1 Ω typical on resistance match between channels at 25°C VSS to VDD analog signal range Fully specified at ±15 V, ±5 V, and +12 V 1.8 V logic compatibility with 2.7 V ≤ VL ≤ 3.3 V 24-lead LFCSP.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ADGS1408 |
Analog Devices |
8:1/Dual 4:1 Muxes | |
2 | ADGS1409 |
Analog Devices |
8:1/Dual 4:1 Muxes | |
3 | ADGS1208 |
Analog Devices |
8:1/Dual 4:1 Mux Switches | |
4 | ADGS1209 |
Analog Devices |
8:1/Dual 4:1 Mux Switches | |
5 | ADGS1212 |
Analog Devices |
Mux Configurable | |
6 | ADGS5412 |
Analog Devices |
High Voltage Latch-Up Proof Quad SPST Switch | |
7 | ADGS5414 |
Analog Devices |
SPI Interface / Octal SPST Switches / Mux | |
8 | ADG1201 |
Analog Devices |
iCMOS SPST | |
9 | ADG1202 |
Analog Devices |
iCMOS SPST | |
10 | ADG1204 |
Analog Devices |
iCMOS Multiplexer | |
11 | ADG1206 |
Analog Devices |
(ADG1206 / ADG1207) iCMOS Multiplexers | |
12 | ADG1207 |
Analog Devices |
(ADG1206 / ADG1207) iCMOS Multiplexers |