TheA6261 is a linear, programmable current regulator providing up to 100 mA from each of four outputs (LP and LY) to drive arrays of high brightness LEDs. The regulated LED current from each output, accurate to 5%, is set by a single reference resistor. Current matching in each string is better than 10% without the use of ballast resistors. Driving LEDs with.
• AEC-Q100 qualified
• Total LED drive current up to 400 mA (LP, LJ, and LY
packages) or 300 mA (LJ)
• Current shared equally up to 100 mA by up to 4 strings
(LP and LY)
• 6 to 50 V supply
• Low dropout voltage
• LED output short-to-ground and thermal protection
• Disable on open LED detection option
• Enable input for PWM control
• Current slew rate limit during PWM
• Current set by reference resistor
• Automotive temperature range (K,
–40°C to 150°C)
PACKAGES
8-pin SOICN with exposed thermal pad (suffix LJ)
10-pin MSOP with exposed thermal pad (suffix LY)
16-pin TSSOP with exposed thermal p.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A6260 |
Allegro MicroSystems |
High Brightness LED Current Regulator | |
2 | A6262 |
Allegro MicroSystems |
Automotive LED Array Driver | |
3 | A6264 |
Allegro MicroSystems |
Automotive Stop/Tail LED Array Driver | |
4 | A6266 |
Allegro MicroSystems |
High Current LED Controller | |
5 | A6267 |
Allegro |
Automotive High Current LED Controller | |
6 | A6268 |
Allegro MicroSystems |
Automotive High Current LED Controller | |
7 | A6201 |
AiT Semiconductor |
250mA LOW CONSUMPTION LINEAR REGULATOR | |
8 | A6201A |
AiT Semiconductor |
CMOS LOW DROPOUT REGULATOR | |
9 | A6210 |
Allegro MicroSystems |
3A 2MHz Buck-Regulating LED Driver | |
10 | A6211 |
Allegro |
Buck Regulator LED Driver | |
11 | A6213 |
Allegro |
PWM Dimmable Buck Regulator LED Driver | |
12 | A6213-1 |
Allegro |
PWM Dimmable Buck Regulator LED Driver |