The A6213 is a single IC switching regulator that provides constant-current output to drive high-power LEDs. It integrates a high-side N-channel DMOS switch for DC-to-DC step- down (buck) conversion. A true average current is output using a cycle-by-cycle, controlled on-time method. Output current is user-selectable by an external current sense resistor. Out.
• AEC-Q100 qualified
• Supply voltage 6 to 48 V
• True average output current control
• 3 A maximum output over operating temperature range
(1.5 A for A6213-1)
• Cycle-by-cycle current limit
• Integrated MOSFET switch
• Dimming via direct logic input or power supply voltage
• Internal control loop compensation
• Undervoltage lockout (UVLO) and thermal shutdown
protection
• Low power shutdown (1 µA typical)
• Robust protection against:
▫ Adjacent pin-to-pin short ▫ Pin-to-GND short ▫ Component open/short faults
PACKAGE: 8-pin SOICN with exposed thermal pad (suffix LJ):
Not to scale
DESCRIPTION.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A6213 |
Allegro |
PWM Dimmable Buck Regulator LED Driver | |
2 | A6210 |
Allegro MicroSystems |
3A 2MHz Buck-Regulating LED Driver | |
3 | A6211 |
Allegro |
Buck Regulator LED Driver | |
4 | A62166 |
PST |
Asymmetric thyristors | |
5 | A6217 |
Allegro |
PWM Dimmable Buck Regulator LED Driver | |
6 | A6217-1 |
Allegro |
PWM Dimmable Buck Regulator LED Driver | |
7 | A62186 |
PST |
Asymmetric thyristors | |
8 | A6219DS |
Allegro MicroSystems |
Dual Full-Bridge PWM Motor Driver | |
9 | A6201 |
AiT Semiconductor |
250mA LOW CONSUMPTION LINEAR REGULATOR | |
10 | A6201A |
AiT Semiconductor |
CMOS LOW DROPOUT REGULATOR | |
11 | A6225 |
UTC |
DUAL PRE-AMPLIFIER | |
12 | A623308 |
AMIC Technology |
8K X 8 BIT CMOS SRAM |