The A611 RF amplifier is a discrete thin film hybrid design, which incorporates the use of thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. An active DC biasing network is used for temperature-stable.
LOW NOISE FIGURE: 3.2 dB (TYP.)
HIGH EFFICIENCY: 31 mA (TYP.) at +5 Vdc
HIGH OUTPUT POWER: +12.5 dBm (TYP.)
Product Image
Description
The A611 RF amplifier is a discrete thin film hybrid design, which incorporates the use of thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. An active DC biasing network is used for temperature-stable performance, in addition to an RF Choke, used for power supply decoupling. Both TO-8 and Surface .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A61 |
MACOM |
Cascadable Amplifier | |
2 | A61-A230XF |
EPCOS |
2-Electrode-Arrester | |
3 | A61-A350XF |
EPCOS |
2-Electrode-Arrester | |
4 | A6100 |
ETC |
2.0A single lithium battery charge management chip | |
5 | A6110 |
AiT Semiconductor |
LOW DROPOUT VOLTAGE REGULATOR | |
6 | A6110A |
AiT Semiconductor |
LOW DROPOUT VOLTAGE REGULATOR | |
7 | A6115 |
AiT Semiconductor |
LOW DROPOUT VOLTAGE REGULATOR | |
8 | A6118 |
Allegro MicroSystems |
VACUUM FLUORESCENT DISPLAY DRIVER | |
9 | A6120 |
AiT Semiconductor |
LOW DROPOUT VOLTAGE REGULATOR | |
10 | A6130 |
EM MICROELECTRONIC |
High Efficiency Linear Power Supply | |
11 | A614 |
FGX |
Low Frequency Power Amplifier | |
12 | A614 |
INCHANGE |
2SA614 |