The A1244 is a two-wire Hall-effect latch. The devices are produced on theAllegro™ advanced BiCMOS wafer fabrication process, which implements a high-frequency, 4-phase, chopper stabilization technique. This technique achieves magnetic stability over the full operating temperature range, and eliminates offsets inherent in devices with a single Hall element t.
▪ AEC-Q100 automotive qualified ▪ High-speed, 4-phase chopper stabilization ▫ Low switchpoint drift throughout temperature range ▫ Low sensitivity to thermal and mechanical stresses ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▪ On-board voltage regulator ▫ 3 to 24 V operation ▪ Solid-state reliability ▪ Robust EMC and ESD performance ▪ Industry-leading ISO 7637-2 performance through use of proprietary, 40 V clamping structures PACKAGES: 3-pin ultra-mini SIP 1.5 mm × 4 mm × 3 mm (suffix UA) 3-pin SOT23-W 2 mm × 3 mm × 1 mm (suffix LH) DESCRIPTION The A1244.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A1240A |
Actel |
(A1225A - A1280A) FPGAs | |
2 | A1240XL |
Actel |
Integrator FPGAs | |
3 | A1240XL-xxxx |
Actel |
FPGAs | |
4 | A1241 |
Toshiba Semiconductor |
2SA1241 | |
5 | A1242 |
Allegro MicroSystems |
Two-Wire Chopper-Stabilized Hall Effect Latch | |
6 | A1245 |
Allegro MicroSystems |
Two Wire Hall-Effect Latch | |
7 | A1246 |
Sanyo Semicon Device |
2SA1246 | |
8 | A1248 |
Sanyo |
2SA1248 | |
9 | A1249 |
Sanyo |
2SA1249 | |
10 | A12 |
Tyco Electronics |
10 TO 1000 MHz CASCADABLE AMPLIFIER | |
11 | A1201 |
Allegro MicroSystems |
Continuous-Time Bipolar Switch | |
12 | A1202 |
Allegro |
Continuous-Time Bipolar Switch |