The A1242 Hall effect latch is a two-wire latch especially suited for operation over extended temperature ranges, from –40 to +150°C. Superior high-temperature performance is made possible through the Allegro dynamic offset cancellation technique, which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and t.
▪ Chopper stabilization ▫ Superior temperature stability ▫ Extremely low switchpoint drift ▫ Insensitive to physical stress
▪ Reverse battery protection ▪ Solid-state reliability ▪ Small size ▪ Robust EMC capability ▪ High ESD ratings (HBM)
Packages: 3 pin SOT23W (suffix LH), and 3 pin SIP (suffix UA)
Description
The A1242 Hall effect latch is a two-wire latch especially suited for operation over extended temperature ranges, from
–40 to +150°C. Superior high-temperature performance is made possible through the Allegro dynamic offset cancellation technique, which reduces the residual offset vo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A1240A |
Actel |
(A1225A - A1280A) FPGAs | |
2 | A1240XL |
Actel |
Integrator FPGAs | |
3 | A1240XL-xxxx |
Actel |
FPGAs | |
4 | A1241 |
Toshiba Semiconductor |
2SA1241 | |
5 | A1244 |
Allegro MicroSystems |
Two Wire Hall-Effect Latch | |
6 | A1245 |
Allegro MicroSystems |
Two Wire Hall-Effect Latch | |
7 | A1246 |
Sanyo Semicon Device |
2SA1246 | |
8 | A1248 |
Sanyo |
2SA1248 | |
9 | A1249 |
Sanyo |
2SA1249 | |
10 | A12 |
Tyco Electronics |
10 TO 1000 MHz CASCADABLE AMPLIFIER | |
11 | A1201 |
Allegro MicroSystems |
Continuous-Time Bipolar Switch | |
12 | A1202 |
Allegro |
Continuous-Time Bipolar Switch |