The A1150, A1152, A1153, A1155, A1156, A1157, and A1158 comprise a family of two-wire, unipolar, Hall-effect switches, which are factory-trimmed to optimize magnetic switchpoint accuracy.These devices are produced on theAllegro™ advanced BiCMOS wafer fabrication process, which implements a high-frequency, 4-phase, chopper-stabilization technique. This techni.
• AEC-Q100 automotive qualified
• High-speed, 4-phase chopper stabilization
• Low switchpoint drift throughout temperature range
• Low sensitivity to thermal and mechanical stresses
• On-chip protection
□□Supply transient protection □□Reverse-battery protection □□On-board voltage regulator □□3 to 24 V operation
• Solid-state reliability
• Robust EMC and ESD performance
• Industry-leading ISO 7637-2 performance through use of proprietary, 40 V clamping structures Continued on the next page…
PACKAGES
3-pin SOT23-W 2 mm × 3 mm × 1 mm (suffix LH)
3-pin ultramini SIP 1.5 mm × 4 mm × 3 mm .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A1150 |
Toshiba Semiconductor |
2SA1150 | |
2 | A1150 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
3 | A1152 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
4 | A1152-F |
Allegro |
Chopper-Stabilized Two-Wire Hall-Effect Switches | |
5 | A1153 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
6 | A1153-F |
Allegro |
Chopper-Stabilized Two-Wire Hall-Effect Switches | |
7 | A1155-F |
Allegro |
Chopper-Stabilized Two-Wire Hall-Effect Switches | |
8 | A1156 |
NEC |
2SA1156 | |
9 | A1156 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
10 | A1156-F |
Allegro |
Chopper-Stabilized Two-Wire Hall-Effect Switches | |
11 | A11560 |
AMT |
Bandpass SAW Filter | |
12 | A1157 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches |