The A1152-F, A1153-F, A1155-F, and A1156-F comprise a family of two-wire, unipolar, Hall-effect switches, which are factory-trimmed to optimize magnetic switchpoint accuracy. These devices are produced on the Allegro™ advanced BiCMOS wafer fabrication process, which implements a high-frequency, 4-phase, chopper stabilization technique. This technique achieve.
▪ AEC-Q100 automotive qualified ▪ Factory-set temperature coefficient (TC) for use with ferrite magnets ▪ High-speed, 4-phase chopper stabilization ▪ Low switchpoint drift throughout temperature range ▪ Low sensitivity to thermal and mechanical stresses ▪ On-chip protection ▫ Supply transient protection ▫ Reverse-battery protection ▫ On-board voltage regulator ▫ 3 to 24 V operation ▪ Solid-state reliability Continued on the next page… PACKAGE: 2-Pin, Ultra-Mini SIP (suffix UB) 1.5 mm × 4 mm × 4 mm DESCRIPTION The A1152-F, A1153-F, A1155-F, and A1156-F comprise a family of two-wire, unipolar, .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | A1153 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
2 | A1150 |
Toshiba Semiconductor |
2SA1150 | |
3 | A1150 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
4 | A1152 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
5 | A1152-F |
Allegro |
Chopper-Stabilized Two-Wire Hall-Effect Switches | |
6 | A1155 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
7 | A1155-F |
Allegro |
Chopper-Stabilized Two-Wire Hall-Effect Switches | |
8 | A1156 |
NEC |
2SA1156 | |
9 | A1156 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches | |
10 | A1156-F |
Allegro |
Chopper-Stabilized Two-Wire Hall-Effect Switches | |
11 | A11560 |
AMT |
Bandpass SAW Filter | |
12 | A1157 |
Allegro MicroSystems |
Two Wire Hall-Effect Switches |