The 74LVC540A is an octal inverting buffer/driver is designed for driving bus lines or buffer memory address registers. The 3-state control gate is a 2-input AND gate with active-low inputs so that, if either output enable (OE1 or OE2) input is high, all eight outputs are in the high-impedance state..These devices feature inputs and outputs on opposite sides.
• Supply Voltage Range from 1.65V to 3.6V
• Sinks or Sources 24mA at VCC = 3V
• CMOS Low Power Consumption
• IOFF Supports Partial Power Down Operation
• Inputs or Outputs Accept Up to 5.5V
• Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage
Applications
• Schmitt Trigger Action at All Inputs
• Typical VOLP (Quiet Output Ground Bounce) Less Than 0.8V with
VCC = 3.3V and TA = +25°C
• Typical VOHV (Quiet Output dynamic VOH) Greater than 2.0V with
VCC = 3.3V and TA = +25°C
• ESD Protection Tested per JESD 22
Exceeds 200-V Machine Model (A115) Exceeds 2000-V Human Body Model (A114).
74LVC540A Product Preview Low-Voltage CMOS Octal Buffer Flow Through Pinout With 5 V−Tolerant Inputs and Outputs (3−Sta.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 74LVC541A |
NXP |
Octal buffer/line driver | |
2 | 74LVC541A |
nexperia |
Octal buffer/line driver | |
3 | 74LVC541A |
Diodes |
OCTAL BUFFER/LINE DRIVER | |
4 | 74LVC541A |
ON Semiconductor |
Low-Voltage CMOS Octal Buffer | |
5 | 74LVC541A-Q100 |
nexperia |
Octal buffer/line driver | |
6 | 74LVC543 |
Philips |
Octal D-type registered transceiver | |
7 | 74LVC543A |
NXP |
Octal D-type registered transceiver | |
8 | 74LVC544A |
NXP |
Octal D-type registered transceiver | |
9 | 74LVC573A |
NXP |
Octal D-type transparent latch | |
10 | 74LVC573A |
STMicroelectronics |
OCTAL D-TYPE LATCH | |
11 | 74LVC573A |
Diodes |
OCTAL TRANSPARENT D-TYPE LATCH | |
12 | 74LVC573A |
ON Semiconductor |
Low-Voltage CMOS Octal Transparent Latch |