The device 6ED family – 2nd generation is a full bridge driver to control power devices like MOS-transistors or IGBTs in 3-phase systems with a maximum blocking voltage of +600 V. Based on the used SOI-technology there is an excellent ruggedness on transient voltages. No parasitic thyristor structures are present in the device. Hence, no parasitic latch-up m.
Infineon thin-film-SOI-technology
Maximum blocking voltage +600 V
Output source/sink current +0.165 A/-0.375 A
Integrated ultra-fast, low RDS(ON) Bootstrap Diode
Insensitivity of the bridge output to negative
transient voltages up to -50 V given by SOItechnology
Separate control circuits for all six drivers
Detection of over current and under voltage supply
Externally programmable delay for fault clear after over current detection
'Shut down' of all switches during error conditions CMOS and LSTTL compatible input (negative logic)
Signal interlocking of every phase to preven.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 6EDL04N06PC |
Infineon |
High voltage gate driver | |
2 | 6EDL04N02PR |
Infineon |
200V and 600V three-phase gate driver | |
3 | 6EDL04I06NC |
Infineon |
High voltage gate driver | |
4 | 6EDL04I06NT |
Infineon |
200V and 600V three-phase gate driver | |
5 | 6EDL04I06PC |
Infineon |
High voltage gate driver | |
6 | 6EDL04I06PT |
Infineon |
200V and 600V three-phase gate driver | |
7 | 6EDL1S |
Tyco |
Power Entry Module | |
8 | 6EDL1S |
corcom |
Power Entry Module Filters | |
9 | 6EDL1SC |
Tyco |
Power Entry Module | |
10 | 6EDL1SC |
corcom |
Power Entry Module Filters | |
11 | 6EDL1SCM |
Tyco |
Power Entry Module | |
12 | 6EDL1SCM |
corcom |
Power Entry Module Filters |