The ’HCT74 devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements are transferred to the outputs on the positi.
• Operating voltage range of 4.5 V to 5.5 V
• Outputs can drive up to 10 LSTTL loads
• Low power consumption, 40-μA max ICC
• Typical tpd = 17 ns
• ±4-mA output drive at 5 V
• Low input current of 1 μA max
• Inputs are TTL-voltage compatible
2 Description
The ’HCT74 devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements are transferred to the outp.
The M54HCxxx and M54HCTxxx series is composed of CMOS functions specifically designed to meet the radiation requirements.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 54HCT00 |
Texas Instruments |
Quadruple 2-Input NAND Gates | |
2 | 54HCT04 |
Silicon Supplies |
Hex Inverter Logic | |
3 | 54HCT166 |
Texas Instruments |
High-Speed CMOS Logic 8-Bit Parallel-In/Serial-Out Shift Register | |
4 | 54HCT173 |
Texas Instruments |
Quad D-Type Flip-Flop | |
5 | 54HCT240 |
Texas Instruments |
High-Speed CMOS Logic Octal Buffer/Line Drivers | |
6 | 54HCT241 |
Texas Instruments |
High-Speed CMOS Logic Octal Buffer/Line Drivers | |
7 | 54HCT244 |
STMicroelectronics |
Rad-hard high speed 2 to 6V CMOS logic | |
8 | 54HCT244 |
Texas Instruments |
High-Speed CMOS Logic Octal Buffer/Line Drivers | |
9 | 54HCT245 |
STMicroelectronics |
Rad-hard high speed 2 to 6V CMOS logic | |
10 | 54HCT245 |
Texas Instruments |
Octal Bus Transceivers | |
11 | 54HCT30 |
Texas Instruments |
8-Input NAND Gate | |
12 | 54HCT32 |
Texas Instruments |
Quad 2-Input OR Gate |