ordering information These devices are positive-edge-triggered D-type flip-flops. The ’HCT377 devices are similar to the ’HCT273 devices, but feature a latched clock-enable (CLKEN) input instead of a common clear. Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock (CL.
ops. The ’HCT377 devices are similar to the ’HCT273 devices, but feature a latched clock-enable (CLKEN) input instead of a common clear. Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock (CLK) pulse if CLKEN is low. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When CLK is at either the high or low level, the D input has no effect at the output. These devices are designed to prevent false clocking by transitions at .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | 54HCT373 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES | |
2 | 54HCT374 |
Texas Instruments |
Octal D-Type Flip-Flop | |
3 | 54HCT30 |
Texas Instruments |
8-Input NAND Gate | |
4 | 54HCT32 |
Texas Instruments |
Quad 2-Input OR Gate | |
5 | 54HCT367 |
Texas Instruments |
Three-State Non-Inverting and Inverting | |
6 | 54HCT368 |
Texas Instruments |
Three-State Non-Inverting and Inverting | |
7 | 54HCT390 |
Texas Instruments |
Dual Decade Ripple Counter | |
8 | 54HCT393 |
Texas Instruments |
Dual 4-Stage Binary Counter | |
9 | 54HCT00 |
Texas Instruments |
Quadruple 2-Input NAND Gates | |
10 | 54HCT04 |
Silicon Supplies |
Hex Inverter Logic | |
11 | 54HCT166 |
Texas Instruments |
High-Speed CMOS Logic 8-Bit Parallel-In/Serial-Out Shift Register | |
12 | 54HCT173 |
Texas Instruments |
Quad D-Type Flip-Flop |