LE24CBP222 |
Part Number | LE24CBP222 |
Manufacturer | Sanyo Semicon Device |
Description | PIN.1 PIN.2 PIN.3 PIN.4 PIN.5 PIN.6 PIN.7 PIN.8 PIN.9 PIN.10 SCL1 SDA1 VDD1 SDA2 GND SDAC SCLC VDDC SCL2 VDD2 Clock input Data input/output Power supply Data input/output Ground Data input/output Clo... |
Features |
a control port, which is a third pin separate from the pins used for the banks, and by accessing the memory areas from this control port, the two-bank configuration (2K bits + 2K bits) can be used as a pseudo-one-bank configuration (4K bits). Together with the 16-byte page write function, this enables a reduction in the number of factory write processes. Furthermore, the EEPROM has a configuration area which is separate from the 2K-bit + 2K-bit area, and by using the settings stored in this configuration area, it is possible to change the slave address for each port and to set read/write prote... |
Document |
LE24CBP222 Data Sheet
PDF 257.76KB |
Distributor | Stock | Price | Buy |
---|
No. | Parte # | Fabricante | Descripción | Hoja de Datos |
---|---|---|---|---|
1 | LE24CB1283 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
2 | LE24CB642 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
3 | LE24CBK22 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
4 | LE24CBK222 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
5 | LE24CBK23MC |
ON Semiconductor |
Dual port EEPROM Two Wire Serial Interface |