PIN.1 SCL1 SDA1 SDA2 GND SDAC SCLC SCL2 VDD Clock input Data input/output Data input/output Ground Data input/output Clock input Clock input Power supply Control port Port 2 Port 1 Port 2 SCL1 SDA1 SDA2 GND 1 2 3 4 8 7 6 5 VDD SCL2 SCLC SDAC PIN.2 PIN.3 PIN.4 PIN.5 PIN.6 PIN.7 PIN.8 0.08 0.5 No.1811-2/20 Datasheet pdf - http://www.DataSheet4U.net/ .
a control port, which is a third pin separate from the pins used for the banks, and by accessing the memory areas from this control port, the two-bank configuration (2K bits + 2K bits) can be used as a pseudo-one-bank configuration (4K bits). Together with the 16-byte page write function, this enables a reduction in the number of factory write processes. Furthermore, the EEPROM has a configuration area which is separate from the 2K-bit + 2K-bit area, and by using the settings stored in this configuration area, it is possible to change the slave address for each port and to set read/write prote.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LE24CBK22 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
2 | LE24CBK23MC |
ON Semiconductor |
Dual port EEPROM Two Wire Serial Interface | |
3 | LE24CB1283 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
4 | LE24CB642 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
5 | LE24CBP222 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
6 | LE24C0221M |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
7 | LE24C023M |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
8 | LE24C042M |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
9 | LE24C043 |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
10 | LE24C082M |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
11 | LE24C162M |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM | |
12 | LE24C322M |
Sanyo Semicon Device |
Two Wire Serial Interface EEPROM |