| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Texas Instruments |
Autonomous Audio Headset Switch 1 • Ground FET Switches (60mΩ typical) • Autonomous Detection of Headset Types: 3-Poles or 4-Poles (with MIC on SLEEVE or RING2) • Microphone Line Switches • Supports FM Signal Transmission Through the Ground FETs • Reduction of Click/Pop Noise • VDD |
|
|
|
|
Texas Instruments |
Fan-Out Switch •1 Can be configured for – Differential Crosspoint Switching – Differential Single Channel 1:4 Multiplexer and Demultiplexer – Differential 2-Channel 1:2 Multiplexer and Demultiplexer – Differential Fan-Out of Signal Pair to Two Ports Simultaneously |
|
|
|
|
Texas Instruments |
1-of-2 Multiplexer/Demultiplexer •1 Qualified for Automotive Applications • AEC-Q100 Qualified With the Following Results: – Device Temperature Grade 2: –40°C to 105°C Ambient Operating Temperature Range – Device HBM ESD Classification Level H2 – Device CDM ESD Classification Level |
|
|
|
|
Texas Instruments |
DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) 6.1-GHz Switch •1 VCC Range 2.3 V to 4.8 V • Mobile Hi-Definition Link (MHL) Switch: – Bandwidth ( –3 dB): 6.1 GHz – RON (Typical): 5.7 Ω – CON (Typical): 1.6 pF • USB Switch: – Bandwidth ( –3 dB): 6.1 GHz – RON (Typical): 4.6 Ω – CON (Typical): 1.4 pF • Current Cons |
|
|
|
|
Texas Instruments |
High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer-Demultiplexer Switch • VCC operation of 2.3V to 3.6V • Switch I/OS accept signals up to 5.5V • 1.8V compatible control-pin inputs • Low-power mode when OE is disabled (1μA) • rON = 6Ω maximum • ΔrON = 0.2Ω typical • CIO(ON) = 7pf maximum • Low power consumption (30μA max |
|
|
|
|
Texas Instruments |
High-Speed USB 2.0 (480-MBPS) 1:2 Multiplexer/Demultiplexer Switch •1 VCC Operation at 3 V and 4.3 V • 1.8-V Compatible Control-Pin Inputs • IOFF Supports Partial Power-Down-Mode Operation • Ron = 10 Ω Maximum • ΔRon <0.35 Ω Typical • Cio(ON) = 7 pF Typical • Low Power Consumption (1 μA Maximum) • ESD Performance Te |
|
|
|
|
Texas Instruments |
4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH • Compatible With HDMI v1.2a (Type A) DVI 1.0 High-Speed Digital Interface – Wide Bandwidth of Over 1.65 Gbps (Bandwidth 1.8 Gbps Typ) – 165-MHz Speed Operation – Serial Data Stream at 10× Pixel Clock Rate – Supports All Video Formats up to 1080p an |
|
|
|
|
Texas Instruments |
16-BIT TO 8-BIT SPDT GIGABIT LAN SWITCH D 16 SEL 17 VCC 18 LED0 19 LED1 20 48 0B1 47 1B1 46 0B2 45 1B2 44 GND 43 2B1 42 3B1 41 2B2 40 3B2 39 GND 38 VCC 37 4B1 36 5B1 35 4B2 34 5B2 33 GND 32 6B1 31 7B1 30 6B2 29 7B2 GND 21 0LED1 22 1LED1 23 GND 24 0LED2 25 1LED2 26 VCC 27 GND 28 The TS |
|
|
|
|
Texas Instruments |
12-Channel 1:2 MUX/DEMUX •1 Switch Type: 2:1 or 1:2 • Dynamic Characteristics – Differential Bandwidth ( –3 dB) – Port A: 6.9 GHz Typical – Port B: 7.5 GHz Typical – Crosstalk (at 1.7 GHz): –40 dB – Isolation (at 1.7 GHz): –23 dB – Insertion Loss (DC) – Port A: –0.75 dB – Po |
|
|
|
|
Texas Instruments |
1A Peak Sink/Source PCDDR3 Termination Regulator 1 • VDD Range – 3.0V to 3.6V • RON 1.75Ω typical • Channel Count – 26 • VDDQ – Input Voltage 1.2V to 3.5V • VTT – VDDQ/2 typical with 1A sink/source capability • VREF – VDDQ/2±1% × VDDQ • Switch Time – (TON/OFF) 100ns Max • IDD Supply Current – High |
|
|
|
|
Texas Instruments |
7-CHANNEL VIDEO SWITCH 1 • High Bandwidth (BW = 1.36 GHz) • Designed for 7-Channel VGA Signals (R,G,B, Hsync, Vsync, DDC Dat, and DDC CLK) • Separate Control Logic for Data and Control Signals • Operating Voltage: 3.3 V ±10% • Low and Flat ON-State Resistance – rON = 3 Ω – |
|
|
|
|
Texas Instruments |
7-CHANNEL VIDEO SWITCH 1 • Supports 7-Channel VGA Signals (R, G, B, HSYNC, VSYNC, DDC CLK, and DDC DAT) • Integrated Level-Shifting Buffers for HSYNC and VSYNC Channels • Operating Voltage – VDD = 3.3 V ±10% – VDD_5 = 5 V ±10% • High Bandwidth of 1.3 GHz ( –3 dB) • Low ON-S |
|
|
|
|
Texas Instruments |
QUAD SPDT WIDE-BANDWIDTH LAN SWITCH ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, E should be tied to VCC through a pullup resistor |
|
|
|
|
Texas Instruments |
2-Channel SPDT Bidirectional Analog Switch • Specified break-before-make switching • Low ON-state resistance (0.3 Ω maximum) • Low charge injection • Excellent ON-state resistance matching • Low total harmonic distortion (THD) • 1.65-V to 3.6-V Single-supply operation • Control inputs are 1.8 |
|
|
|
|
Texas Instruments |
Autonomous Audio Accessory Detection and Configuration Switch •1 Supple Range of 2.5 V to 4.5 V • Accessory Insertion/Removal Detection with Adjustable De-bounce Timings • Accessory Configuration Detection: – Stereo 3-pole Headphone – 4-pole Standard Headset with MIC on Sleeve – 4-pole OMTP Headset with MIC on |
|
|
|
|
Texas Instruments |
MHL or MyDP Switch •1 VCC Range: 2.5 V to 4.3 V • Mobile High-definition Link (MHL) or Mobility Display Port (MyDP) Switch: – Bandwidth ( –3 dB): 6.5 GHz – RON (Typical): 5.5 Ω – CON (Typical): 1.3 pF • USB Switches (2 Sets): – Bandwidth ( –3 dB): 6.5 GHz – RON (Typical) |
|
|
|
|
Texas Instruments |
High-speed USB 2.0 (480-Mbps) 1:2 multiplexer-demultiplexer switch • VCC operation from 2.3V and 3.6V • VI/O accepts signals up to 5.5V • 1.8V compatible control-pin inputs • Low-power mode when OE is disabled (1μA) • RON = 6ω maximum • δrON = 0.2ω typical • CIO(ON) = 6pf maximum • Low power consumption (30μA maximu |
|
|
|
|
Texas Instruments |
4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH 1 •2 Compatible With HDMI v1.3 DVI 1.0 High-Speed Digital Interface – Wide Bandwidth of Over 3.8 Gbps – Serial Data Stream at 10× Pixel Clock Rate – Supports All Video Formats up to 1080p and SXGA (1280 × 1024 at 75 Hz) – High Bandwidth of 4.95 Gbps |
|
|
|
|
Texas Instruments |
2-Gbps DIFFERENTIAL SWITCH 8-Bit 1:2 MULTIPLEXER/DEMULTIPLEXER 1 • Four High-Speed Bidirectional Differential Pair Channel MUX/DEMUX • Supports up to 2 Gbps Data Rate • VDD Operating Range 2.5 V or 3.3 – -0 V to 3.3 V Rail To Rail at 2.5 V – -0 V to 5 V Rail To Rail at 3.3V • IOFF partial Powerdown and Back-Driv |
|
|
|
|
Texas Instruments |
Low-Voltage Single-Supply 2-Channel SPST Analog Switches •1 Low ON-State Resistance (Ron) – 0.9-Ω Max (3-V Supply) – 1.5-Ω Max (1.8-V Supply) • 0.4-Ω Max Ron Flatness (3-V Supply) • 1.6-V to 3.6-V Single-Supply Operation • Available in SOT-23 and VSSOP Packages • High Current-Handling Capacity (100 mA Cont |
|