No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
Texas Instruments |
I2C Compatible Current/Power Monitor •1 AEC-Q100 Qualified With the Following Results: – Device Temperature Grade 1: –40°C to 125°C – Device HBM ESD Classification 2 – Device CDM ESD Classification C4B • Senses Bus Voltages From 0 V to 36 V • High-Side or Low-Side Sensing • Reports Curr |
|
|
|
Texas Instruments |
SINGLE-CHIP MULTIBAND RF TRANSMITTER a fully-integrated VCO. Only the PLL loop filter is external to the device. Two fully-programmable operation modes, Mode0 and Mode1, allow extremely fast switching between two preprogrammed settings (for example, TX_frequency_0/TX_frequency_1; …) wit |
|
|
|
Texas Instruments |
HIGH-PERFORMANCE IMPACT PAL CIRCUITS high speed and functional equivalency when compared with currently available devices. These IMPACT-X™ circuits combine the latest Advanced Low-Power Schottky technology with proven titanium-tungsten fuses to provide reliable, high-performance substit |
|
|
|
ETCTI |
Serial Interface ACP-Compatible Microprocessor Sys Hardware Monitor (Rev. E) |
|
|
|
ETCTI |
LM80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor (Rev. F) |
|
|
|
ETCTI |
TAS5548 8-Channel HD Compatible Audio Processor with ASRC and PWM Output (Rev. A) |
|
|
|
ETCTI |
MCPC Compatible USB Port Multimedia Switch |
|
|
|
ETCTI |
MCPC Compatible USB Port Multimedia Switch |
|
|
|
Texas Instruments |
HIGH-PERFORMANCE IMPACT PAL CIRCUITS high speed and functional equivalency when compared with currently available devices. These IMPACT™ circuits combine the latest Advanced Low-Power Schottky technology with proven titanium-tungsten fuses to provide reliable, high-performance substitut |
|
|
|
Texas Instruments |
3-V to 5.5-V Multichannel RS-232 Compatible Line Driver/Receiver • Operates with 3-V to 5.5-V VCC supply • Always-active noninverting receiver output (ROUT2B) • Low standby current: 1 μA typical • External capacitors: 4 × 0.1 μF • Accepts 5-V logic input with 3.3-V supply • Inter-operable with SN65C3238, SN75C3238 |
|
|
|
Texas Instruments |
3-V TO 5.5-V SINGLE-CHANNEL RS-232 COMPATIBLE LINE DRIVER/RECEIVER 1 • Operates With 3-V to 5.5-V VCC Supply • Operates up to 1 Mbit/s • Low Standby Current . . . 1 μA Typ • External Capacitors . . . 4 × 0.1 μF • Accepts 5-V Logic Input With 3.3-V Supply • RS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Bod |
|
|
|
ETCTI |
Single-Chip Very Low Power RF Transceiver with 8051-Compatible Microcontroller (Rev. A) |
|
|
|
Texas Instruments |
HIGH-PERFORMANCE IMPACT-X PAL CIRCUITS high speed and functional equivalency when compared with currently available devices. These IMPACT-X™ circuits combine the latest Advanced Low-Power Schottky technology with proven titanium-tungsten fuses to provide reliable, high-performance substit |
|
|
|
Texas Instruments |
Digital Control Compatible Synchronous Buck Gate Drivers 1 •2 Input from Digital Controller Sets Operating Frequency and Duty Cycle • Up to 2-MHz Switching Frequency • Dual Current Limit Protection with Independently Adjustable Thresholds • Fast Current Sense Circuit with Adjustable Blanking Interval Preve |
|
|
|
Texas Instruments |
Digital Control Compatible Synchronous-Buck Gate Driver 1 • Dual High Current Drivers. • Full Compatibility with TI Fusion Digital Power Supply Controllers, such as UCD91xx and UCD92xx Families • Operational to 2 MHz Switching Frequency • High-Side FET and Output Current Limit Protection with Independentl |
|
|
|
Texas Instruments |
3-V to 5.5-V Multichannel RS-232 Compatible Line Driver/Receiver hronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 1 Mbit/s and a driver output slew |
|
|
|
Texas Instruments |
3-V to 5.5-V Multichannel RS-232 Compatible Line Driver/Receiver hronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 1 Mbit/s and a driver output slew |
|
|
|
Texas Instruments |
3-V to 5-V Multichannel RS-232 Compatible Line Driver/Receiver functions when FORCEON is low and FORCEOFF is high. During this mode of operation, if the device does not sense a valid RS-232 signal, the driver outputs are disabled. If FORCEOFF is set low and EN is high, both drivers and receivers are shut off, an |
|
|
|
Texas Instruments |
HIGH-PERFORMANCE IMPACT PAL CIRCUITS high speed and functional equivalency when compared with currently available devices. These IMPACT-X™ circuits combine the latest Advanced Low-Power Schottky technology with proven titanium-tungsten fuses to provide reliable, high-performance substit |
|
|
|
Texas Instruments |
Low-Power High-Performance IMPACT PAL Circuits high speed and functional equivalency when compared with currently available devices. These IMPACT™ circuits combine the latest Advanced Low-Power Schottky technology with proven titanium-tungsten fuses to provide reliable, high-performance substitut |
|