| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Texas Instruments |
Low-Power Quad Differential Comparator rate from a single power supply and typically to draw 60-µA drain current over a wide range of voltages. Operation from split power supplies also is possible and the ultra-low power-supply drain current is independent of the power-supply voltage. App |
|
|
|
|
Texas Instruments |
150-mA Low-noise Low-dropout Regulator •1 Wide Supply Voltage Range: 2.2 V to 16 V • Ensured 150-mA Output Current • Requires Minimum External Components • Stable With Low-ESR Output Capacitor • < 1-µA Quiescent Current When Shut Down • Low Ground Pin Current at all Loads • Output Voltage |
|
|
|
|
Texas Instruments |
100-mA Ultra-Low Dropout Regulators • Input Voltage (VIN) Range: – Legacy chip: 2.2 V to 16 V – New chip: 2.5 V to 16 V • Output Voltage (VOUT) Range: 1.2 V to 5.0 V • Output Voltage (VOUT) Accuracy: – ±0.75% for A-Grade legacy chip – ±1.25% for standard-grade legacy chip – ±0.5% for |
|
|
|
|
Texas Instruments |
DDR Termination Regulator 1 •2 Low Output Voltage Offset • Works with +5v, +3.3v and 2.5v Rails • Source and Sink Current • Low External Component Count • No External Resistors Required • Linear Topology • Available in SOIC-8, SO PowerPAD-8 or WQFN-16 Packages • Low Cost and |
|
|
|
|
Texas Instruments |
150-mA Low-noise Low-dropout Regulator • VIN range (new chip): 2.5 V to 16 V • VOUT range (new chip): – 1.2 V to 5.0 V (fixed, 100-mV steps) • VOUT accuracy: – ±1% for A-grade legacy chip – ±1.5% for standard-grade legacy chip – ±0.5% for new chip only • ±1% output accuracy over load, and |
|
|
|
|
Texas Instruments |
200-mA Ultra-Low-Dropout Fixed or Adjustable Voltage Regulator •1 Wide Supply Voltage Range (16 V Maximum) • Ultra-Low-Dropout Voltage • 0.5% Output Voltage Accuracy (A Grade) • Ensured 200-mA Output Current • < 1-μA Quiescent Current when Shutdown • Low GROUND Pin Current at All Loads • High Peak Current Capabi |
|
|
|
|
Texas Instruments |
500-mA Ultra Low-Dropout Regulator •1 2.1-V to 16-V Input Voltage Range • 2.5-V to 5-V Fixed Output Voltage Options • Ultra-Low Dropout Voltage • 500-mA Continuous Output Current • Very Low Output Noise With External Capacitor • < 0.8-µA Quiescent Current When Shutdown • Low Ground Pi |
|
|
|
|
Texas Instruments |
150-mA Low-noise Low-dropout Regulator • VIN range (new chip): 2.5 V to 16 V • VOUT range (new chip): – 1.2 V to 5.0 V (fixed, 100-mV steps) • VOUT accuracy: – ±1% for A-grade legacy chip – ±1.5% for standard-grade legacy chip – ±0.5% for new chip only • ±1% output accuracy over load, and |
|
|
|
|
Texas Instruments |
Adjustable Micropower Voltage Regulators •1 Wide Input Range: Up to 30 V • Rated Output Current of 100 mA • Low Dropout: 380 mV (Typ) at 100 mA • Low Quiescent Current: 75 μA (Typ) • Tight Line Regulation: 0.03% (Typ) • Tight Load Regulation: 0.04% (Typ) • High VO Accuracy – 1.4% at 25°C – |
|
|
|
|
Texas Instruments |
Termination Regulator •1 Minimum VDDQ: – 1.8 V (LP2996-N) – 1.35 V (LP2996A) • Source and Sink Current • Low Output Voltage Offset • No External Resistors Required for Setting Output Voltage • Linear Topology • Suspend to Ram (STR) Functionality • Stable With Ceramic Capa |
|
|
|
|
Texas Instruments |
100-mA Ultra-Low Dropout Regulators •1 Operating Input Voltage Range: 2.1 V to 16 V • Ultralow-Dropout Voltage • Output Voltage Accuracy 0.75% (A Grade) • Specified 100-mA Output Current • < 1-μA Quiescent Current when Shutdown • Low Ground Pin Current at All Load Currents • High Peak |
|
|
|
|
Texas Instruments |
100-mA Ultra-Low Dropout Regulators • Input Voltage (VIN) Range: – Legacy chip: 2.2 V to 16 V – New chip: 2.5 V to 16 V • Output Voltage (VOUT) Range: 1.2 V to 5.0 V • Output Voltage (VOUT) Accuracy: – ±0.75% for A-Grade legacy chip – ±1.25% for standard-grade legacy chip – ±0.5% for |
|
|
|
|
Texas Instruments |
100-mA Ultra-Low Dropout Regulators • Input Voltage (VIN) Range: – Legacy chip: 2.2 V to 16 V – New chip: 2.5 V to 16 V • Output Voltage (VOUT) Range: 1.2 V to 5.0 V • Output Voltage (VOUT) Accuracy: – ±0.75% for A-Grade legacy chip – ±1.25% for standard-grade legacy chip – ±0.5% for |
|
|
|
|
ETCTI |
8-Bit LVTTL-GTLP Adj.-Edge-Rate Regist. Xcvr W/ Split LVTTL Port Feedback Path (Rev. C) |
|
|
|
|
Texas Instruments |
Adjustable Micropower Voltage Regulators •1 Qualified for Automotive Applications • Wide Input Range: Up to 35 V • Rated Output Current of 100 mA • Low Dropout: 380 mV (Typ) at 100 mA • Low Quiescent Current: 75 μA (Typ) • Tight Line Regulation: 0.03% (Typ) • Tight Load Regulation: 0.04% (T |
|
|
|
|
Texas Instruments |
Micropower 150-mA Voltage Regulator •1 Operating Input Supply Voltage: 2.2 V to 16 V • Output Current: 150 mA • Low ZOUT: 0.3 Ω Typical (10 Hz to 1 MHz) • Stable with Low-ESR Output Capacitor • Low Ground Pin Current at All Loads • Output Voltage Accuracy 1% (A Grade) • High Peak Curre |
|
|
|
|
Texas Instruments |
Adjustable Micropower Voltage Regulators •1 Wide Input Range: Up to 30 V • Rated Output Current of 100 mA • Low Dropout: 380 mV (Typ) at 100 mA • Low Quiescent Current: 75 μA (Typ) • Tight Line Regulation: 0.03% (Typ) • Tight Load Regulation: 0.04% (Typ) • High VO Accuracy – 1.4% at 25°C – |
|
|
|
|
Texas Instruments |
Micropower Quad Operational Amplifier 1 •2 Low Supply Current: 85μA (typ) • Low Offset Voltage: 2mV (typ) • Low Input Bias Current: 2nA (typ) • Input Vommon Mode to GND • Interfaces to CMOS Logic • Wide Supply Range: 3V < V+ < 32V • Small Outline Package Available • Pin-for-pin Compatibl |
|
|
|
|
Texas Instruments |
Ultra-Low Power Dual Operational Amplifiers •1 Low Supply Current: 54 μA (Typical) • Low Offset Voltage: 2 mV (Typical) • Low Input Bias Current: 2 nA (Typical) • Input Common-Mode to GND • Wide Supply Voltage: 3 V < VCC < 32 V • Pin Compatible With LM358 and LM2904 2 Applications • LCD Displa |
|
|
|
|
Texas Instruments |
ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS • Low Supply Current . . . 85 µA Typ • Low Offset Voltage . . . 2 mV Typ • Low Input Bias Current . . . 2 nA Typ • Input Common Mode to GND • Wide Supply Voltage . . . 3 V < VCC < 32 V • Pin Compatible With LM324 • Applications – LCD Displays – Porta |
|