| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Littelfuse |
Metal-Oxide Varistors • Breakthrough in low • High operating voltage varistor design temperature range provides high peak (up to up to 125ºC (phenolic 10KA) surge current rating coating option) • Reduced footprint and • 5 model sizes available: volume required for |
|
|
|
|
Littelfuse |
Metal-Oxide Varistors • Breakthrough in low • High operating voltage varistor design temperature range provides high peak (up to up to 125ºC (phenolic 10KA) surge current rating coating option) • Reduced footprint and • 5 model sizes available: volume required for |
|
|
|
|
OPTEK |
Slotted Optical Switch Choice of pins or wires mounting configuration Choice of aperture Choice of output configuration Choice of opaque or IR transmissive shell material Data rates to 250 kBaud Low power consumption Description: The OPB460, OPB470, OPB |
|
|
|
|
GW |
5000 Watt Axial Lead TVS * 5000 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V VOLTAGE RANGE 5.0 to 440 Volts 5000 Watts Peak P |
|
|
|
|
Littelfuse |
Metal-Oxide Varistors • Breakthrough in low • High operating voltage varistor design temperature range provides high peak (up to up to 125ºC (phenolic 10KA) surge current rating coating option) • Reduced footprint and • 5 model sizes available: volume required for |
|
|
|
|
Littelfuse |
Metal-Oxide Varistors • Breakthrough in low • High operating voltage varistor design temperature range provides high peak (up to up to 125ºC (phenolic 10KA) surge current rating coating option) • Reduced footprint and • 5 model sizes available: volume required for |
|
|
|
|
OPTEK |
Slotted Optical Switch Choice of pins or wires mounting configuration Choice of aperture Choice of output configuration Choice of opaque or IR transmissive shell material Data rates to 250 kBaud Low power consumption Description: The OPB460, OPB470, OPB |
|
|
|
|
OPTEK |
Slotted Optical Switch Choice of pins or wires mounting configuration Choice of aperture Choice of output configuration Choice of opaque or IR transmissive shell material Data rates to 250 kBaud Low power consumption Description: The OPB460, OPB470, OPB |
|
|
|
|
OPTEK |
Slotted Optical Switch Choice of pins or wires mounting configuration Choice of aperture Choice of output configuration Choice of opaque or IR transmissive shell material Data rates to 250 kBaud Low power consumption Description: The OPB460, OPB470, OPB |
|
|
|
|
Grayhill |
PIEZO Pushbutton Switches • Fully Sealed • Virtually Indestructible • Vandal Resistant • Indoor and Outdoor Use DIMENSIONS In inches (and millimeters) Ø 1.102 Non-Illuminated (Ø 28,00) Single Button MA1 .748 (19,00) Illuminated Single Button .443 (11,25) ML1 .276 (7,00) |
|
|
|
|
Grayhill |
PIEZO Pushbutton Switches • Fully Sealed • Virtually Indestructible • Vandal Resistant • Indoor and Outdoor Use DIMENSIONS In inches (and millimeters) Ø 1.102 Non-Illuminated (Ø 28,00) Single Button MA1 .748 (19,00) Illuminated Single Button .443 (11,25) ML1 .276 (7,00) |
|
|
|
|
Grayhill |
PIEZO Pushbutton Switches • Fully Sealed • Virtually Indestructible • Vandal Resistant • Indoor and Outdoor Use DIMENSIONS In inches (and millimeters) Ø 1.102 Non-Illuminated (Ø 28,00) Single Button MA1 .748 (19,00) Illuminated Single Button .443 (11,25) ML1 .276 (7,00) |
|
|
|
|
TONTEK |
CONTINUOUS TOUCH DIMMER Operating voltage 4.5V ~6.8V Operating current < 1.2mA @VDD=5.0V, no load Support two output mode : (1) PWM Dim Mode, (2) Direct/Toggel Mode. Small adjusts duty rate 0.2%. Support two dimmer speeding as 6 sec and 12 sec lightness circulatio |
|
|
|
|
Littelfuse |
Discrete Unidirectional TVS Diode • ESD, IEC 61000-4-2, ±30kV contact, ±30kV air • EFT, IEC 61000-4-4, 40A (5/50ns) • Lightning, IEC 610004-5 2nd edition, 80A (tP=8/20μs, SP1105S) • Low clamping voltage • Low leakage current • Moisture Sensitivity Level (MSL-1) • Lead free and RoHS |
|
|
|
|
Littelfuse |
SIDACtor Protection Thyristors and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Fails short circuit when surged in excess of ratings t Two-pair protection t 40% lower capacitance than our Baseband Protectors, for applications that dem |
|
|
|
|
Littelfuse |
SIDACtor Protection Thyristors and Benefits t Low voltage overshoot t Low on-state voltage t Does not degrade with use t Replaces four discrete components t Fails short circuit when surged in excess of ratings t Low Capacitance Applicable Global Standards t TIA-968-A t |
|
|
|
|
JGD |
3000Watts Transient Voltage Suppressors * 3000 Watts Peak Power * Low Inductance * Unidirectional and Bidirectional unit * Voltage Range: 5.0 to 220 Volts. 3KP5.0(C)(A) THRU 3KP220(C)(A) 3000Watts Transient Voltage Suppressors 5.0 to 220 Volts A BA C D Cathode Mark P600 DIM INCHES MIN |
|
|
|
|
Littelfuse |
SIDACtor Protection Thyristors and Benefits ■ Low voltage overshoot ■ Low on-state voltage ■ Does not degrade in capability after multiple surge events within limit. ■ Low capacitance ■ Fails short circuit when surged in excess of ratings ■ Pb-free E3 means 2nd level interconnec |
|
|
|
|
Littelfuse |
Protection Thyristors and Benefits • 3kA 8/20 surge rating • Automotive grade AEC-Q101 qualified • AC mains protection between L-N • low overshoot voltage • Low on-state voltage • Surge capability does not degrade after multiple events within its surge ratings • F |
|
|
|
|
Littelfuse |
Protection Thyristors and Benefits • Low voltage overshoot • Low on-state voltage • Does not degrade surge capability after multiple surge events within limit. • Fails short circuit when surged in excess of ratings • Low capacitance • 2nd level interconnect is Pb-f |
|