No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
Sanken electric |
Darlington transistors with built-in temperature compensation diodes for audio amplifier applications qBuilt-in temperature compensation diodes and one emitter resistor qReal time temperature compensation The temperature compensation diodes are mounted on one chip and placed in the center of the chip to detect temperature rises directly. qElimination |
|
|
|
Anachip |
3A PWM Buck DC/DC Converter - Output voltage: 3.3V, 5V, 12V and adjustable output version - Adjustable version output voltage range, 1.23V to 37V+4% - 150Khz +15% fixed switching frequency - Voltage mode non-synchronous PWM control - Thermal-shutdown and current-limit protectio |
|
|
|
Analog Technology |
1A Low Dropout Positive Adjustable or Fixed-Mode Regulator • 1.4V maximum dropout at full load current • Fast transient response • Output current limiting • Built-in thermal shutdown • Packages: SOT223, TO252, TO220, SOT89 • Good noise rejection • 3-Terminal Adjustable or Fixed 1.5V, 1.8V,2.5V, 3.3V, 5.0V |
|
|
|
Diodes Incorporated |
2A PWM BUCK DC/DC CONVERTER include a guaranteed +4% tolerance on output voltage under specified input voltage and output load conditions, and +15% on the oscillator frequency. The output version included fixed 3.3V, 5V, 12V, and an adjustable type. The chips are available in a |
|
|
|
Diodes Incorporated |
3A PWM BUCK DC/DC CONVERTER include a guaranteed +/- 4% tolerance on the output voltage under specified input and output load conditions, and +/- 15% on oscillator frequency. The AP1501 offers both fixed and adjustable output voltages. For fixed outputs the AP1501 supports 3.3V |
|
|
|
TE |
900 Vdc Contactor n New — 100 megohms, min. @ 500Vdc At End of Life — 50 megohms, min. @ 500Vdc Mechanical Life — 1 million cycles Operate & Release Time Operate Time Max. — 25ms Operate Bounce Max. — 5ms Release Time — 10ms Contact Data Contact Arrangement, Main Co |
|
|
|
Diodes |
2A/3A PWM BUCK DC/DC CONVERTER • Output voltage: 3.3V, 5V, 12V and adjustable output version • Adjustable version output voltage range, 1.23V to 37V+4% • 50KHz +15% fixed switching frequency • Voltage mode non-synchronous PWM control • Thermal-shutdown and current-limit protection |
|
|
|
Anachip |
PWM Buck DC/DC Converter - Adjustable version output voltage range, 0.8V to 18V+4% - 300KHz +15% fixed switching frequency - Voltage mode non-synchronous PWM control - Thermal-shutdown and current-limit protection - ON /OFF shutdown control input - Operating voltage can be u |
|
|
|
TE |
High Voltage DC Contactors tion sensitive, can be mounted in any orientation RoHS versions available Physical Data Contact Arrangement — Main Contacts — SPST-Latching (form X) 1X Auxiliary Contact — SPST-NO (form A) Dimensions — See drawing Weight, Nominal — 0.35 Kg (12.35 oz) |
|
|
|
TE |
High Voltage DC Contactors n RoHS versions available Physical Data Contact Arrangement — Main Contacts — SPST-Latching (or NO Form X) 1X Auxiliary Contact — SPST-NO (form A) Dimensions — See drawing Weight, Nominal — 0.35 Kg (12.35 oz) Insulation Resistance — Terminal to Termi |
|
|
|
TE |
High Voltage DC Contactors n RoHS versions available Physical Data Contact Arrangement — Main Contacts — SPST-Latching (or NO Form X) 1X Auxiliary Contact — SPST-NO (form A) Dimensions — See drawing Weight, Nominal — 0.35 Kg (12.35 oz) Insulation Resistance — Terminal to Termi |
|
|
|
Advanced Power Electronics |
2A SINK/SOURCE BUS TERMINATION REGULATOR Ideal for DDR-I, DDR-II and DDR-III VTT Applications Sink and Source up to 2Amp Integrated Power MOSFETs Generates Termination Voltage for SSTL_2, SSTL_18, HSTL, SCSI-2 and SCSI-3 Interfaces. High Accuracy Output Voltage at Full-Load Output Adjustmen |
|
|
|
AMIC Technology |
1W Per Channel Stereo Class-D Audio Power Amplifier n n n n n 1 watt per channel with 8-ohm load Max. efficiency ≈ 80% with 8-ohm load at 5 volts Filterless Digital gain control Build-in depop circuitry n n n n Error protection for short circuit and over-temperature Mute (shutdown) current < 1µA typic |
|
|
|
System Logic Semiconductor |
DC-to-DC Converter Controller FUNCTIONAL BLOCK DIAGRAM • • • • • • • Operation from 3.0 V to 40 V Input Low Standby Current Current Limiting Output Switch Current to 1.5 A Output Voltage Adjustable Frequency Operation to 100 kHz Precision 2% Reference MAXIMUM RATINGS Rating Powe |
|
|
|
Sanken electric |
Darlington transistors with built-in temperature compensation diodes for audio amplifier applications qBuilt-in temperature compensation diodes and one emitter resistor qReal time temperature compensation The temperature compensation diodes are mounted on one chip and placed in the center of the chip to detect temperature rises directly. qElimination |
|
|
|
TE |
High Voltage DC Contactors tion sensitive, can be mounted in any orientation RoHS versions available Physical Data Contact Arrangement — Main Contacts — SPST-Latching (form X) 1X Auxiliary Contact — SPST-NO (form A) Dimensions — See drawing Weight, Nominal — 0.35 Kg (12.35 oz) |
|
|
|
TE |
900 Vdc Contactor n New — 100 megohms, min. @ 500Vdc At End of Life — 50 megohms, min. @ 500Vdc Mechanical Life — 1 million cycles Operate & Release Time Operate Time Max. — 25ms Operate Bounce Max. — 5ms Release Time — 10ms Contact Data Contact Arrangement, Main Co |
|
|
|
Siemens |
External power supply the manufacturer. Damages due to a inappropriate mounting location z Observe the environmental requirements recom- mended by the manufacturer. z Do not operate the unit in areas exposed to extreme dust formation, moisture, vibration or flammable gase |
|
|
|
STC Technology |
MCU ................................................................................................ 6 1.2 Block diagram........................................................................................ 7 1.3 Pin Configurations .................... |
|
|
|
STC Technology |
MCU ................................................................................................ 6 1.2 Block diagram........................................................................................ 7 1.3 Pin Configurations .................... |
|