No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
Silergy |
2.3V Minimum Input and 5.5V Maximum Output 3A Peak Current Synchronous Boost • 2.3-5.0V input voltage range • Adjustable output voltage from 2.5V to 5.5V • Pseudo-constant frequency: 1MHz • 3A peak current limit • Input under voltage lockout • Load disconnect during shutdown • Output over voltage protection • Low RDS(ON) (mai |
|
|
|
Silergy |
1MHz Synchronous Step Down Regulator • Low RDS(ON) for internal switches (top/bottom):110mΩ/80mΩ • 3A continuous load current capability • 2.7-5.5V input voltage range • High |
|
|
|
Silergy |
High Efficiency Bi-Direction Power Bank Regulator Maximum 18V input voltage surge Bad adapter detection Build in power path NFETs and Power Switches 500kHz switching frequency operation Trickle Current / Constant Current / Constant Voltage Charge Mo |
|
|
|
Silergy |
Single Stage Flyback And PFC Controller • Primary side control eliminate the opto-coupler. • Internal high current MOSFET driver: 1A sourcing and 2A sinking • Low quiescent current at start up mode: 10uA typical • 16V rising UVLO with 9V hysteresis • Valley turn-on of the primary MOSFET to |
|
|
|
Silergy |
Low Capacitance TVS Protection Protects One Data, Control, or Power Line For Operating Voltage of 3.3V and Below Low Capacitance: 1.0pF (Typical) Low Leakage Current: 0.1μA @ VRWM (Typical) Low Clamping Voltage Transient Protection for High-Speed Data Lines IEC 61000 |
|
|
|
Silergy |
2.3V Minimum Input and 5.5V Maximum Output 3A Peak Current Synchronous Boost • 2.3-5.0V input voltage range • Adjustable output voltage from 2.5V to 5.5V • Pseudo-constant frequency: 1MHz • 3A peak current limit • Input under voltage lockout • Load disconnect during shutdown • Output over voltage protection • Low RDS(ON) (mai |
|
|
|
Silergy |
1.8V Minimum Input and 5.5V Maximum Output 5A Peak Current Synchronous Boost |
|
|
|
Silergy |
Single Stage Flyback And PFC Controller • Primary side control eliminates the opto-coupler. • PWM or Analog Dimming. • Valley turn-on of the primary MOSFET to achieve low switching losses • 0.3V primary current sense reference voltage leads to |
|
|
|
Silergy |
1.8V Minimum Input and 5.5V Maximum Output 6A Peak Current Synchronous Boost • 1.8V Minimum input voltage • Adjustable output voltage from 2.5V to 5. 5V • 6A peak current limit • Input under voltage lockout • Load disconnect during shutdown • Output over voltage protection • Input battery voltage monitor • Low RDS(ON) (main s |
|
|
|
Silergy |
Single Stage Flyback And PFC Controller • Primary side control eliminates the opto-coupler. • Valley turn-on of the primary MOSFET to achieve low switching losses • 0.3V primary current sense reference voltage leads to a lower sense resistance thus a lower conduction loss. • Internal high |
|
|
|
Silergy |
1.8V Minimum Input and 5.5V Maximum Output 5A Peak Current Synchronous Boost |
|
|
|
Silergy |
Octal Power and Energy Measurement The Teridian 78M6618 is a highly integrated IC for independent monitoring and measurement of up to eight single-phase AC outlets. With multiple host interface options, an integrated LCD driver, and configurable I/Os, the device is ideal for metered |
|
|
|
Silergy |
Poly- and Single-Phase Energy Meter SoCs ● ● Dual-core Architecture for Maximum Performance and Flexibility in 128-Pin LQFP • 32-Bit MAXQ30 MPU Core with 256/512KB Flash, 32KB Data NV-RAM (Shared with CE Data RAM), Up to 20MHz • 32-Bit Computing Engine (CE) with Separate 16KB Program and D |
|
|
|
Silergy |
Low Capacitance TVS Protection Transient Protection for High-speed Data Lines IEC 61000-4-2 (ESD) ±30kV (Air)±30kV (Contact) IEC 61000-4-5 (Surge) 4A (8/20μs) Package Optimized for High-Speed Lines Ultra-Small Package (1.0mm0.6mm0.55mm) Protects One Data, Control, or |
|
|
|
Silergy |
Low Loss Power Distribution Switch • Distribution voltages: 2.4V to 5.5V • Programmable current limit • Enable polarity: active high • Over temperature shutdown and automatic retry • Reverse blocking (no body diode) • At shutdown, OUT can be forced higher than IN • Automatic outpu |
|
|
|
Silergy |
3.5A Synchronous Step Down Regulator The SY8063 is a high-efficiency 1 MHz synchronous step-down DC-DC regulator IC capable of delivering up to 3.5A output current. The SY8063 operates over a wide input voltage range from 2.7V to 5.5V and integrate main switch and synchronous switch wi |
|
|
|
Silergy |
1MHz Synchronous Step Down Regulator • Low RDS(ON) for internal switches (top/bottom):110mΩ/80mΩ • 3A continuous load current capability • 2.7-5.5V input voltage range • High |
|
|
|
Silergy |
High Efficiency 1MHz 2A Step-Up Regulator • Wide input range: 3-8V bias input, 16Vout max • 1MHz switching frequency • Minimum on time: 100ns typical • Minimum off time: 100ns typical • Low RDS(ON): 150mΩ • RoHS Compliant and Halogen Free • Accurate Reference: 0.6VREF • Compact package: SOT2 |
|
|
|
Silergy |
Single Stage Flyback And PFC Controller • Primary side control eliminates the opto-coupler. • Valley turn-on of the primary MOSFET to achieve low switching losses • Power factor >0.90 with single-stage conversion. • Reliable short LED and Open LED protection • Quick start up <500ms • Low s |
|
|
|
Silergy |
Single Stage Flyback And PFC Controller • Primary side control eliminates the opto-coupler. • Valley turn-on of the primary MOSFET to achieve low switching losses • 0.3V primary current sense reference voltage leads to a lower sense resistance thus a lower conduction loss. • Internal high |
|