| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
ROHM |
Optical Sensor Green filter with excellent wavelength selectivity. Built-in Ircut Filter. LED driver with current selection. Correspond to 1.8V I2C Interface. Package W(Typ) x D(Typ) x H(Ma |
|
|
|
|
ROHM |
Standard CMOS LDO Regulators 1) High accuracy output voltage: ±1% 2) High ripple rejection ratio: 70 dB (BHŜŜFB1WHFV/WG, BHŜŜLB1WHFV/WG) 3) Low dropout voltage: 60 mV (when current is 100 mA) (BHŜŜMA3WHFV) 4) Stable with ceramic output capacitors 5) Low Bias current : 40µA (IO = |
|
|
|
|
Rohm |
Ambient Light Sensor 1) I2C bus Interface ( f / s Mode Support, Slave Address : "0100011" ) 2) Spectral responsibility is approximately human eye response 3) Illuminance to Digital Converter 4) Wide range and High resolution. (1 – 65528 lx ) 5) Low Current by power down |
|
|
|
|
Rohm |
1 Chip Optical Proximity Sensor + Ambient Light Sensor 1) Correspond to I2C bus interface ( f/s mode & Hs mode support ) 2) Low Current by power down function 3) Correspond to 1.8V logic interface 4) ALS spectral responsibility is approximately human eye response ( Peak wavelength : typ. 550nm ) 5) Corre |
|
|
|
|
ROHM |
FM Stereo Transmitter or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buy |
|
|
|
|
Rohm |
Wireless Audio-Link 1) It is possible to improve the timbre because it has the pre-emphasis circuit, limiter circuit, and the 19kHz/38kHz low-pass trap filter circuit. 2) Built-in pilot-tone system FM stereo modulator circuit. 3) The transmission frequency is stable bec |
|
|
|
|
Rohm |
Wireless Audio-Link 1) It is possible to improve the timbre because it has the pre-emphasis circuit, limiter circuit, and the low-pass filter circuit. 2) Built-in pilot-tone system FM stereo modulator circuit. 3) The transmission frequency is stable because it has a PLL |
|
|
|
|
ROHM |
Digital 16bit Serial Output Type Ambient Light Sensor IC Built-in Ircut filter 2 outputs with different spectral response Correspond to dark window because of high sensitivity Rejecting 50Hz/60Hz light noise I2C bus interface (f/s mode support) It is possible to select 2 type of I2C bus slave a |
|
|
|
|
Rohm |
FM stereo transmitter IC any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or c |
|
|
|
|
Rohm |
Ambient Light Sensor 2 1) I C bus Interface (f / s Mode Support) 2) Spectral responsibility is approximately human eye response 3) Illuminance to Digital Converter 4) Wide range and High resolution. (1 – 65535 lx) 5) Low Current by power down function 6) 50Hz / 60Hz Ligh |
|
|
|
|
Rohm |
Ambient Light Sensor 2 1) I C bus Interface (f / s Mode Support) 2) Spectral responsibility is approximately human eye response 3) Illuminance to Digital Converter 4) Wide range and High resolution. (1 – 65535 lx) 5) Low Current by power down function 6) 50Hz / 60Hz Ligh |
|
|
|
|
Rohm |
Ambient Light Sensor 1) I2C bus Interface ( f / s Mode Support ) 2) Spectral responsibility is approximately human eye response 3) Illuminance to Digital Converter 4) Wide range and High resolution. ( 1 - 65535 lx ) 5) Low Current by power down function 6) 50Hz / 60Hz Li |
|
|
|
|
Rohm |
Ambient Light Sensor 1) I2C bus Interface (f / s Mode Support) 2) Spectral responsibility is approximately human eye response 3) Illuminance to Digital Converter 4) Wide range and High resolution. (1 - 65535 lx) 5) Low Current by power down function 6) 50Hz / 60Hz Light |
|
|
|
|
Rohm |
Ambient Light Sensor 2 1) I C bus Interface （ F/S mode & Hs mode Support, Slave address : "0101001" ） 2) Spectral responsibility is approximately human eye response 3) Illuminance to Digital Converter 4) Wide range and High resolution. （ 1 – 65535 lx ） 5) Low Current by |
|
|
|
|
Rohm |
FM stereo radio receiver cifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatso |
|
|
|
|
Rohm |
FM stereo radio receiver cifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatso |
|
|
|
|
Rohm |
Ambient Light Sensor 1) I2C bus Interface ( f / s Mode Support, Slave address "0101001". ) 2) There are two outputs that peaks of a spectrum response are in visible light (Type0) and in infrared light (Type1). 3) Illuminance to Digital Converter 4) Very wide range and Hi |
|
|
|
|
ROHM |
Optical Sensor Build-in green photodiode with excellent wavelength selective green filter and IR curt filter. Built-in IR photodiode for touch detection. Correspond to high sampling frequency. (1024Hz) LED driver with |
|
|
|
|
ROHM |
Ambient light sensor The Excellent Ircut Characteristics with an Ircut Filter The High Sensitivity and Wide Dynamic Range (0.005 – 40k lx) Supports Low Transmittance (Dark) Window Correspond to I2C Bus Interface ( f/s mode support ) Low Current by Power Down Fu |
|
|
|
|
ROHM |
Ambient Light Sensor Built-in Ircut Filter Rejecting 50 Hz / 60 Hz Light Noise I2C Bus Interface (f/s mode support) It is possible to select 2 type of I2C bus slave address. Correspond to 1.8 V Logic Interface Resolution 0.0125 lx/count (Typ) (In highest gain |
|