| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
National Semiconductor |
Single/Dual/Quad / Low Offset / Low Noise / RRO Operational Amplifiers (Typical 2.7V Supply Values; Unless Otherwise Noted) n Guaranteed 2.7V and 5V specifications n Maximum VOS (LMV771) 850µV (limit) n Voltage Noise — f = 100Hz 12.5nV/ — f = 10kHz 7.5nV/ n Rail-to-Rail output swing — w/600Ω load 100mV from rail — w/2kΩ |
|
|
|
|
ON Semiconductor |
Rail-to-Rail Operational Amplifiers • Low Offset Voltage: 3.5 mV • Very low Offset Drift: 1.0 mV/°C • High Bandwidth: 5 MHz • Rail−to−Rail Output Swing into a 600 W load • Capable of driving highly capacitive loads • Small Packages: LMV821 in SC−70 LMV824 in SOIC−14 and TSSOP−14 • Thes |
|
|
|
|
National Semiconductor |
45ns / Ultra Low Power / Low Voltage / Rail-to-Rail Input Comparator an open drain output. By connecting an external resistor, the output of the comparator can be used as a level shifter. The LMV7239 features a push-pull output stage. This feature allows operation without the need of an external pull-up resistor. The |
|
|
|
|
National Semiconductor |
1.8V / 1MHz / Low Power Operational Amplifiers (Typical 1.8V Supply Values; Unless Otherwise Noted) n Guaranteed 1.8V, 2.7V and 5V specifications n Rail-to-Rail input & output swing — w/600Ω load 100 mV from rail — w/2kΩ load 30 mV from rail n VCM 300mV beyond rails n 90dB gain w/600Ω load n Supp |
|
|
|
|
National Semiconductor |
(LMV841 - LMV844) Wide Supply Range Operational Amplifiers Unless otherwise noted, typical values at TA = 25°C, V+ = 5V. ■ Space saving 5-Pin SC70 package ■ Supply voltage range 2.7V to 12V ■ Guaranteed at 3.3V, 5V and ±5V 1 mA per channel ■ Low supply current 4.5 MHz ■ Unity gain bandwidth 133 dB ■ Open loo |
|
|
|
|
ON Semiconductor |
Low Voltage Comparators • Guaranteed 2.7 V and 5 V Performance • Input Common−mode Voltage Range Extends to Ground • Open Drain Output for Wired−OR Applications • Low Quiescent Current: 60 mA/channel TYP @ 5 V • Low Saturation Voltage 200 mV TYP @ 5 V • Propagation Delay 20 |
|
|
|
|
National Semiconductor |
Single-Channel / Quad-Band GSM Power Controller in micro SMD (Typical Unless Otherwise Noted) n 50dB RF detection range (typical) n micro SMD package 1.5mm x 1.5mm x 0.995mm n Support of GaAs HBT, bipolar technology n Quad-band operation n Shutdown mode for Power Save in Rx slot n GPRS compliant n External loo |
|
|
|
|
National Semiconductor |
General Purpose / Low Voltage / Rail-to-Rail Output Operational Amplifiers (For V+ = 5V and V− = 0V, Typical Unless Otherwise Noted) n Guaranteed 2.7V and 5V Performance n No Crossover Distortion n Space Saving Package n Industrial Temp.Range n Gain-Bandwidth Product n Low Supply Current LMV321 LMV358 LMV324 n Rail-to-Rail |
|
|
|
|
National Semiconductor |
Operational Amplifiers (Typical 2.7V Supply Values;Unless Otherwise Noted) n Guaranteed 2.7V and 5V specifications n Input referred voltage noise (@10kHz) 29nV/ n Supply current (per amplifier) 100µA n Gain bandwidth product 1.0MHz n Slew rate 1.0V/µs n Shutdown Current (L |
|
|
|
|
National Semiconductor |
10MHz / Low Noise / Low Voltage / and Low Power Operational Amplifier (For Typical, 5 V Supply Values; Unless Otherwise Noted) n Guaranteed 2.2V and 5.0V Performance n Low Supply Current LMV721/2 930µA/amplifier @2.2V n High Unity-Gain Bandwidth 10MHz n Rail-to-Rail Output Swing @ 600Ω load 120mV from either rail at 2. |
|
|
|
|
National Semiconductor |
45ns / Ultra Low Power / Low Voltage / Rail-to-Rail Input Comparator an open drain output. By connecting an external resistor, the output of the comparator can be used as a level shifter. The LMV7239 features a push-pull output stage. This feature allows operation without the need of an external pull-up resistor. The |
|
|
|
|
National Semiconductor |
Low Voltage / Low Power / R-to-R Output / 5 MHz Op Amps (For Typical, 5 V Supply Values; Unless Otherwise Noted) n Ultra Tiny, SC70-5 Package 2.0 x 2.0 x 1.0 mm Connection Diagrams 5-Pin SC70-5/SOT23-5 14-Pin SO/TSSOP DS100128-84 Top View 8-Pin SO/MSOP Top View DS100128-85 DS100128-63 Top View © 19 |
|
|
|
|
National Semiconductor |
1.8V / 1MHz / Low Power Operational Amplifiers (Typical 1.8V Supply Values; Unless Otherwise Noted) n Guaranteed 1.8V, 2.7V and 5V specifications n Rail-to-Rail input & output swing — w/600Ω load 100 mV from rail — w/2kΩ load 30 mV from rail n VCM 300mV beyond rails n 90dB gain w/600Ω load n Supp |
|
|
|
|
National Semiconductor |
Dual Operational Amplifier (Typical values, V+ = 3.3V, TA = 25˚C, unless otherwise specified) n Input noise voltage 12.8 nV/ n Input bias current 0.6 pA n Offset voltage 1.6 mV n CMRR 80 dB n Open loop gain 122 dB n Rail-to-rail output n GBW 5 MHz n Slew rate 5.8 V/µs n Supply |
|
|
|
|
National Semiconductor |
(LMV796 / LMV797) 1.8V Operational Amplifiers (Typical 5V supply, unless otherwise noted) n Input referred voltage noise 5.8 nV/ n Input bias current 100 fA n Unity gain bandwidth 17 MHz n Supply current per channel — LMV796 1.15 mA — LMV797 1.30 mA n Rail-to-rail output swing — @ 10 kΩ load 25 |
|
|
|
|
National Semiconductor Corporation |
Far Field Noise Suppression Microphone Amplifier ■ ■ ■ ■ ■ ■ ■ ■ No loss of voice intelligibility No added processing delay Low power consumption Differential outputs Excellent RF immunity Adjustable 12 - 54dB gain Shutdown function Space-saving 16 –bump micro SMD package Applications ■ ■ ■ ■ ■ Mob |
|
|
|
|
ON Semiconductor |
Rail-to-Rail Operational Amplifiers • Operation from 2.7 V to 5.0 V Single−Sided Power Supply • LMV321 Single Available in Ultra Small 5 Pin SC70 Package • No Output Crossover Distortion • Rail−to−Rail Output • Low Quiescent Current: LMV358 Dual − 220 mA, Max per Channel • No Output Ph |
|
|
|
|
ON Semiconductor |
Low Voltage Comparators • Guaranteed 2.7 V and 5 V Performance • Input Common−mode Voltage Range Extends to Ground • Open Drain Output for Wired−OR Applications • Low Quiescent Current: 60 mA/channel TYP @ 5 V • Low Saturation Voltage 200 mV TYP @ 5 V • Propagation Delay 20 |
|
|
|
|
Fairchild Semiconductor |
General Purpose / Low Voltage / Rail-to-Rail Output Amplifiers at +2.7V • 80 μA Supply Current per Channel • 1.2 MHz Gain Bandwidth Product • Output Voltage Range: 0.01 V to 2.69 V • Input Voltage Range: -0.25 V to +1.5 V • 1.5 V/μs Slew Rate • LMV321 Directly Replaces Other Industry Standard LMV321 Amplifiers: |
|
|
|
|
National Semiconductor |
Low Power / RRIO Operational Amplifiers (For 5 Supply, Typical Unless Otherwise Noted). n Low offset voltage 3mV, max n Gain-bandwidth product 5MHz, typ n Slew rate 5V/µs, typ n Space saving packages SOT23-5 and SOT23-6 < 10µs n Turn on time from shutdown n Industrial temperature range −40 |
|