| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
OKI electronic componets |
132-Channel LCD Driver with Built-in RAM for LCD Dot Matrix Displays and is therefore suitable for displays in battery-operated portable equipment. The ML9050 has 65 common signal outputs and 132 segment signal outputs and one chip can drive a display of up to 65 ¥ 132 dots. The ML9051 has 49 common signal outputs an |
|
|
|
|
OKI electronic componets |
1/2 DUTY / 160-OUTPUT STATIC LCD DRIVER • Logic power supply : 2.7 to 5.5V • LCD Driving voltage : 4.5 to 16V • Maximum number of segments that can be driven: Static display mode : 160 segments 1/2 Duty display mode : 320 segments • Serial transfer clock : 1 MHz max. • The microcontroller |
|
|
|
|
OKI electronic componets |
5 x 7 Dot Character x 16-Digit x 2-Line Display Controller/Driver • Logic power supply (VDD) : 3.3 V± 10% or 5.0 V± 10% • VFD tube drive power supply (VDISP) : 20 to 60 V • VFD driver output current (VFD driver output can be connected directly to the VFD tube. No pull-down resistor is required.) - Segment driver (S |
|
|
|
|
OKI electronic componets |
56-Bit Duplex/Triplex (1/2 duty / 1/3 duty) VF Controller/Driver with Digital Dimming a selection of a master mode and a slave mode, and therefore it can be used to expand segments for the VFD driver with keyscan and A/D converter function. ML9211 provides an interface with a microcontroller only by three signal lines: DATA IN, CLOCK |
|
|
|
|
OKI electronic componets |
DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER • Easy interface with an 8-bit or 4-bit microcontroller. • Dot matrix LCD controller/driver for lowercase (5 x 7 dots) or uppercase (5 x 10 dots). • Automatic power ON reset. • COMMON signal drivers (16) and SEGMENT signal drivers (40). • Can control |
|
|
|
|
OKI electronic componets |
5 x 7 Dot Character x 16-Digit x 2-Line Display Controller/Driver with Character RAM • Logic power supply (VDD) : 3.3 V± 10% or 5.0 V± 10% • VFD tube drive power supply (VDISP) : 20 to 60 V • VFD driver output current (VFD driver output can be connected directly to the VFD tube. No pull-down resistor is required.) - Segment driver (S |
|
|
|
|
OKI electronic componets |
5 x 7 Dot Character x 16-Digit Display Controller/Driver with Character RAM • Logic power supply (VDD) : 3.3 V± 10% or 5.0 V± 10% • Fluorescent display tube drive power supply (VDISP) : 3.3 V± 10% or 5.0 V± 10% • Fluorescent display tube drive power supply (VFL) : –20 to –60 V • VFD driver output current (VFD driver output c |
|
|
|
|
OKI electronic componets |
5 x 7 Dot Character x 16-Digit Display Controller/Driver with Character RAM • Logic power supply and vacuum fluorescent display tube drive power supply (VDD) : 3.3 V± 10% or 5.0 V± 10% • Fluorescent display tube drive power supply (VFL) : –20 to –60 V • VFD driver output current (VFD driver output can be connected directly t |
|
|
|
|
OKI electronic componets |
DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER • Easy interface with an 8-bit or 4-bit microcontroller. • Dot matrix LCD controller/driver for lowercase (5 x 7 dots) or uppercase (5 x 10 dots). • Automatic power ON reset. • COMMON signal drivers (16) and SEGMENT signal drivers (40). • Can control |
|
|
|
|
OKI electronic componets |
DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER • Easy interface with an 8-bit or 4-bit microcontroller. • Dot matrix LCD controller/driver for lowercase (5 x 7 dots) or uppercase (5 x 10 dots). • Automatic power ON reset. • COMMON signal drivers (16) and SEGMENT signal drivers (40). • Can control |
|
|
|
|
OKI electronic componets |
DOT MATRIX LCD CONTROLLER DRIVER • Easy interfacing with 8 –bit or 4 –bit microcontroller • Switchable between serial and parallel interfaces • Dot –matrix LCD controller/driver for a small (5 ¥ 7 dots) or large (5 ¥ 10 dots) font • Built –in circuit allowing automatic resetting at powe |
|
|
|
|
OKI electronic componets |
LCD Driver with Key Scanner and RAM • Logic voltage: VDD 2.7 to 5.5 V • LCD drive voltage: VBI 6 to 16 V (positive voltage) • 80 segment outputs,10 common outputs for ML9090-01 and 18 common outputs for ML909002 • Built-in bit-mapped RAM (ML9090-01: 80 ¥ 10 = 800 bits, ML9090-02: 80 ¥ |
|
|
|
|
OKI electronic componets |
LCD Driver with Key Scanner and RAM • Logic voltage: VDD 2.7 to 5.5 V • LCD drive voltage: VBI 6 to 16 V (positive voltage) • 80 segment outputs,10 common outputs for ML9090-01 and 18 common outputs for ML909002 • Built-in bit-mapped RAM (ML9090-01: 80 ¥ 10 = 800 bits, ML9090-02: 80 ¥ |
|
|
|
|
OKI electronic componets |
5 x 7 Dot Character x 16-Digit Display Controller/Driver • Logic power supply and vacuum fluorescent display tube drive power supply (VDD) : 3.3 V± 10% or 5.0 V± 10% • Fluorescent display tube drive power supply (VFL) : –20 to –60 V • VFD driver output current (VFD driver output can be connected directly t |
|
|
|
|
OKI electronic componets |
DOT MATRIX LCD CONTROLLER DRIVER |
|
|
|
|
OKI electronic componets |
132-Channel LCD Driver with Built-in RAM for LCD Dot Matrix Displays and is therefore suitable for displays in battery-operated portable equipment. The ML9050 has 65 common signal outputs and 132 segment signal outputs and one chip can drive a display of up to 65 ¥ 132 dots. The ML9051 has 49 common signal outputs an |
|
|
|
|
OKI electronic componets |
60-Bit Vacuum Fluorescent Display Tube Grid/Anode Driver • Logic Supply Voltage (VCC) : +3.3V± 10% or +5.0V± 10% • Driver Supply Voltage (VHV): +60V • Driver Output Current IOHVH1 (Only one driver output : "H") : –40mA (VDISP=40V) IOHVH2 (All the driver outputs : "H") : –120mA (VDISP=40V) IOHVL:1mA • Direc |
|
|
|
|
OKI electronic componets |
60-Bit Vacuum Fluorescent Display Tube Grid/Anode Driver • Logic Supply Voltage (VCC) : +3.3V± 10% or +5.0V± 10% • Driver Supply Voltage (VHV): +60V • Driver Output Current IOHVH1 (Only one driver output : "H") : –40mA (VDISP=40V) IOHVH2 (All the driver outputs : "H") : –120mA (VDISP=40V) IOHVL:1mA • Direc |
|
|
|
|
OKI electronic componets |
CAN Controller IC • Conforms to CAN protocol specification (Bosch, V2.0 part B/Active) • Maximum of 1 Mbps bit rate • Message box: • • • • • • • Up to 32 message boxes can be used, and messages up to 8 bytes long can be transmitted or received for each message bo |
|