No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
|
|
Microchip |
Read/Write LF RFID IDIC These are the following features of read/write LF RFID IDIC 100 kHz to 150 kHz: • Contactless Power Supply • Contactless Read/Write Data Transmission • Radio Frequency fRF from 100 kHz to 150 kHz • Basic mode or Extended mode • Compatible with T5557, |
|
|
|
Microchip |
Dual CAN Flexible Data-Rate Transceiver • Supports both “classic” CAN 2.0 and CAN FD physical layer requirements • Optimized for CAN FD (Flexible Data-Rate) at 2, 5 and 8 Mbps Operation: - Maximum Propagation Delay: 120 ns - Loop Delay Symmetry: -10%/+10% (2 Mbps) • Implements ISO-11898-2 |
|
|
|
Microchip Technology |
(25LC0x0A) 1K-4K SPI Serial EEPROM High Temp Family Data Sheet • Max. Clock 5 MHz • Low-Power CMOS Technology: - Max. Write Current: 5 mA at 5.5V, 5 MHz - Read Current: 5 mA at 5.5V, 5 MHz - Standby Current: 10 μA at 5.5V • 128 x 8 through 512 x 8-bit Organization • Byte and Page-level Write Operations • Self-T |
|
|
|
Microchip Technology |
(25LC0x0A) 1K-4K SPI Serial EEPROM High Temp Family Data Sheet • Max. Clock 5 MHz • Low-Power CMOS Technology: - Max. Write Current: 5 mA at 5.5V, 5 MHz - Read Current: 5 mA at 5.5V, 5 MHz - Standby Current: 10 μA at 5.5V • 128 x 8 through 512 x 8-bit Organization • Byte and Page-level Write Operations • Self-T |
|
|
|
Microchip |
5V/3.3V Dual Differential Data and Clock D Flip-Flop • 3.3V and 5V Power Supply Option • Differential D, CLK and Q • Extended VEE Range of –3.0V to –5.5V • VBB Output for Single-Ended Use • 1100 MHz Min. Toggle Frequency • Asynchronous Reset and Set • Available in 20-Pin SOIC Package Package Type SY10 |
|
|
|
Microchip |
High-Speed CAN Transceiver • ISO 26262 Functional Safety Ready • High-Speed CAN Transceiver Fully Compliant to ISO 11898‑2, ISO 11898‑5, ISO 11898‑6, ISO 11898‑2:2016 and SAEJ 2962‑2 • Autonomous Bus Biasing According to ISO 11898‑2:2016 • Low Electromagnetic Emission (EME) an |
|
|
|
Microchip |
UHF ASK/FSK Transceiver identical to the ATA8535 but without transmit function. Features • Internal Microcontroller System – AVR 8-Bit Microcontroller Core – Firmware Library in ROM – 20-Kbyte Flash Program Memory for Customer Applications – 2-Kbyte SRAM (1 Kbyte for Custom |
|
|
|
Microchip |
UHF ASK/FSK Transceiver identical to the ATA5835, but without the transmit function. Features • Internal Microcontroller System – 8-Bit AVR Microcontroller Core and Firmware Library in ROM – 20-Kbyte Flash Program Memory for Customer Applications and 2-Kbyte SRAM (1 Kbyte f |
|
|
|
Microchip |
High-Speed CAN Flexible Data Rate Transceiver • Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation - Maximum Propagation Delay: 120 ns - Loop Delay Symmetry: -10%/+10% (2 Mbps) • Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements • Very Low Standby C |
|
|
|
Microchip Technology |
OTP 8-Bit CMOS MCU with EEPROM Data Memory • • • • • • • • • High performance RISC CPU Only 35 single word instructions to learn 4K x 14 on-chip EPROM program memory 176 x 8 general purpose registers (SRAM) All single cycle instructions (500 ns) except for program branches which are two-cycl |
|
|
|
Microchip Technology |
OTP 8-Bit CMOS MCU with EEPROM Data Memory • • • • • • • • • High performance RISC CPU Only 35 single word instructions to learn 4K x 14 on-chip EPROM program memory 176 x 8 general purpose registers (SRAM) All single cycle instructions (500 ns) except for program branches which are two-cycl |
|
|
|
Microchip |
High-Speed CAN Transceiver • Fully ISO 11898-2, ISO 11898-5, and SAE J2284 Compliant • CAN FD Ready • Communication Speed up to 5 Mbps • Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI) • Differential Receiver with Wide Common-Mode Range • ATA6560: Si |
|
|
|
Microchip Technology |
(25LC0x0A) 1K-4K SPI Serial EEPROM High Temp Family Data Sheet • Max. Clock 5 MHz • Low-Power CMOS Technology: - Max. Write Current: 5 mA at 5.5V, 5 MHz - Read Current: 5 mA at 5.5V, 5 MHz - Standby Current: 10 μA at 5.5V • 128 x 8 through 512 x 8-bit Organization • Byte and Page-level Write Operations • Self-T |
|
|
|
Microchip |
High-Speed CAN Transceiver • Fully ISO 11898-2, ISO 11898-2: 2016 and SAE J2962-2 Compliant • CAN FD Ready • Communication Speed up to 5 Mbps • ISO 26262 Functional Safety Ready • Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI) • Differential Receive |
|
|
|
Microchip |
LIN SBC including LIN Transceiver • ISO 26262 Functional Safety Ready • Supply Voltage up to 40V • Operating Voltage VVS = 5V to 28V • Supply Current - Sleep mode: typically 10 µA - Silent mode: typically 47 µA - Very low current consumption at low supply voltages (2V < VVS < 5.5V): |
|
|
|
Microchip |
Sub-GHz ASK/FSK RF Transmitter • AVR Microcontroller Core with 20 Kbytes of User Program Flash, 1 Kbyte SRAM and 24 Kbytes RF Library in Firmware (ROM) • Supported Frequency Ranges: – Low-band 310 MHz to 318 MHz, 418 MHz to 477 MHz – High-band 836 MHz to 956 MHz – 315.00 MHz/433.9 |
|
|
|
Microchip Technology |
8-Pin/ 8-Bit CMOS Microcontroller with A/D Converter and EEPROM Data Memory • In-Circuit Serial Programming (ICSP™) • Internal 4 MHz oscillator with programmable calibration • Selectable clockout • Power-on Reset (POR) • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) • Watchdog Timer (WDT) with its own on-chip RC |
|
|
|
Microchip |
High-Speed CAN Flexible Data Rate Transceiver • Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation - Maximum Propagation Delay: 120 ns - Loop Delay Symmetry: -10%/+10% (2 Mbps) • Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements • Very Low Standby C |
|
|
|
Microchip Technology |
Personal Computer Data Acquisition A/D Converter • • • • • • • • Upgrade of Pin-Compatible TC7135, ICL7135 200kHz Operation Single 5V Operation With TC7660 Multiplexed BCD Data Output UART and Microprocessor Interface Control Outputs for Auto-Ranging Input Sensitivity: 100µV No Sample and Hold Requ |
|
|
|
Microchip |
High-Speed CAN Transceiver • Fully ISO 11898-2, ISO 11898-5, and SAE J2284 Compliant • CAN FD Ready • Communication Speed up to 5 Mbps • Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI) • Differential Receiver with Wide Common-Mode Range • ATA6560: Si |
|