| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Intersil Corporation |
Microprocessor-Compatible / Real-Time Clock the ICM7170 can be easily interfaced to any available microprocessor. The ICM7170 generates two types of interrupts, periodic and alarm. The periodic interrupt (100Hz, 10Hz, etc.) can be programmed by the internal interrupt control register to provi |
|
|
|
|
Analog Devices |
iCMOS Dual SPST Switches 2.1 Ω on resistance 0.5 Ω maximum on resistance flatness Up to 250 mA continuous current Fully specified at +12 V, ±15 V, ±5 V No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 10-lead MSOP and 10-lead, 3 mm × 3 mm LFCSP packag |
|
|
|
|
NXP |
General purpose CMOS timer I Exact equivalent in most applications for NE/SE555 I Low supply current: 80 µA (typical) I Extremely low trigger, threshold, and reset currents: 20 pA (typical) I High-speed operation: 500 kHz guaranteed I Wide operating supply voltage range guaran |
|
|
|
|
Analog Devices |
General-Purpose Timers include low THRESHOLD, TRIGGER, and RESET currents, a wide operating supply voltage range, and improved performance at high frequencies. These CMOS low-power devices offer significant performance advantages over the standard 555 and 556 bipolar time |
|
|
|
|
Intersil Corporation |
(ICM7216x) 8-Digit / Multi-Function / Frequency Counters/Timers All Versions • Functions as a Frequency Counter (DC to 10MHz) • Four Internal Gate Times: 0.01s, 0.1s, 1s, 10s in Frequency Counter Mode • Directly Drives Digits and Segments of Large Multiplexed LED Displays (Common Anode and Common Cathode Versions |
|
|
|
|
Texas Instruments |
BiCMOS Low-Power Current-Mode PWM Controller • Enhanced replacement for UCx84x and UCx84xA family with pin-to-pin compatibility • Operating frequency: 1MHz Maximum • 50μA Startup Current, 100μA Maximum • Low operating current: 2.3mA (at fOSC = 52kHz) • Fast, cycle-by-cycle overcurrent limiting: |
|
|
|
|
Intersil Corporation |
One Second/One Minute Timebase Generator • Guaranteed 2V Operation • Very Low Current Consumption (Typ) . . . . 100µA at 3V • All Outputs TTL Compatible • On Chip Oscillator Feedback Resistor • Oscillator Requires Only 3 External components: Fixed Capacitor, Trim Capacitor, and A Quartz Cry |
|
|
|
|
TDK |
High Performance 6-Axis MEMS MotionTracking an operating voltage range down to 1.71V. Communication ports include I2C and high speed SPI at 10 MHz. Ordering Information PART TEMP RANGE ICM-20602† −40°C to +85°C †Denotes RoHS and Green-Compliant Package PACKAGE 16-Pin LGA Block Diagram |
|
|
|
|
ACCUTEK |
64 Pin Version 524288 x 32 Bit CMOS - BiCMOS Static Random Access Memory · 524,288 x 32 bit organization · Similar to JEDEC standard 64 pin SIM format except that A18 replaces PD1 on Pin #3 · Common I/O, single OE and WE functions with four separate chip selects (CE) · Fast access times from 15 nSEC · Low height, 0.640 in |
|
|
|
|
Maxim Integrated |
Digit Counter/Decoder/Driver |
|
|
|
|
ICmic |
SINGLE 12/10/8-BIT VOLTAGE-OUTPUT DACS • 12/10/8-Bit Monotonic DACs in 6 lead SOT-23 Package • Wide Output Voltage Swing • Micro-Power • On Board 1.25V Reference • Serial Interface with three-wire SPI/QSPI and Microwire Interface Compatible • 8µs Full-Scale Settling Time APPLICATIONS • Ba |
|
|
|
|
Integrated Device Technology |
BiCMOS StaticRAM 240K (16K x 15-BIT) CACHE-TAG RAM For PowerPCO and RISC Processors • 16K x 15 Configuration – 12 TAG Bits – 3 Separate I/O Status Bits (Valid, Dirty, Write Through) • Match output uses Valid bit to qualify MATCH output • High-Speed Address-to-Match comparison times – 8/9/10/12ns over commercial temperature range • |
|
|
|
|
ETCTI |
BiCMOS 9-Bit Bus-Interface D-Type Latch With 3-State Outputs |
|
|
|
|
Harris Semiconductor |
4-Digit LCD Display Driver |
|
|
|
|
Sipex Corporation |
(SP9841 / SP9842) BiCMOS DAC eight individual reference inputs, while the SP9842 provides four pair of voltage reference inputs. Both parts feature 6.3MHz bandwidth, two –quadrant multiplication, and a three –wire serial interface. Other features include midscale preset, no signal |
|
|
|
|
TDK |
Premium Performance 6-Axis MotionTracking IMU a 2 kB FIFO and 2 programmable interrupts with ultra-low-power wake-on-motion support to minimize system power consumption. The ICM-42605 supports the lowest gyro and accel sensor noise in this IMU class, and has the highest stability against tempera |
|
|
|
|
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers •1 100-μA Typical Starting Supply Current • 500-μA Typical Operating Supply Current • Operation up to 1 MHz • Internal Soft Start • Internal Fault Soft Start • Internal Leading-Edge Blanking of the Current Sense Signal • 1-A Totem-Pole Output • 70-ns |
|
|
|
|
Texas Instruments |
Low-Power BiCMOS Current-Mode PWM Controllers •1 100-μA Typical Starting Supply Current • 500-μA Typical Operating Supply Current • Operation up to 1 MHz • Internal Soft Start • Internal Fault Soft Start • Internal Leading-Edge Blanking of the Current Sense Signal • 1-A Totem-Pole Output • 70-ns |
|
|
|
|
Texas Instruments |
BiCMOS Low-Power Current-Mode PWM Controller • Enhanced replacement for UCx84x and UCx84xA family with pin-to-pin compatibility • Operating frequency: 1MHz Maximum • 50μA Startup Current, 100μA Maximum • Low operating current: 2.3mA (at fOSC = 52kHz) • Fast, cycle-by-cycle overcurrent limiting: |
|
|
|
|
TDK |
6-Axis MEMS MotionTracking The ICM-42688-P is a 6-axis MEMS MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer. It has a configurable host interface that supports I3CSM, I2C and SPI serial communication, features a 2 kB FIFO and 2 programmable i |
|