| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
|
|
|
Fiti |
Sunchronous Buck PWM DC-DC Controller over current protection. The output current is monitored by sensing the voltage drop across the RDS (ON) of the low side MOSFET which eliminates the need for a current sensing resistor. This device is available in SOP-8 package. Pin Assignment SO Pac |
|
|
|
|
Fiti |
2A Ultra Low Dropout Linear Regulator small size as an exposed pad to reduce the junction-to-case resistance. Features Ultra Low Dropout - 0.24V(typ.) at 2A Output Current Low ESR Output Capacitor (Multi-layer Chip Capacitors (MLCC)) Applicable 0.8V Reference Voltage Fast Transi |
|
|
|
|
Fiti |
High Efficiency 1MHz 3.5A Synchronous Step Down Regulator High Efficiency up to 96% Low RDS(ON) for Internal Switch (Top/Bottom): 85/65mΩ 2.7V-5.5V Input Voltage Range Adjustable Output Voltage Down to 0.6V Internal Compensation Function 1MHz Switching Frequency Minimizes the External Components Internal So |
|
|
|
|
Fiti |
1.4MHz SOT23 CURRENT-MODE STEP-UP DC/DC CONVERTER ● Fixed Frequency 1.4MHz Current-Mode PWM Operation. ● Adjustable Output Voltage up to 30V. ● Guaranteed 13V/200mA Output with 5V Input. ● 2.5V to 5.5V Input Range ● Maximum 0.1uA Shutdown Current. ● Programmable Soft-Start ● Needs Only Tiny Inductor |
|
|
|
|
Fiti |
1-Cell and 2-Cell Boost Converter Synchronous Rectification: 94% Efficiency Very Low Start-up Voltage at 0.85V Automatically Switch to PSM Mode for Improving Efficiency at Light Load Internal Anti-Ringing Switch Across Inductor Fixed Frequency Operation at 1.0MHz Very Low Shutdown Cu |
|
|
|
|
Fiti |
3A/2A Bus Termination Regulator 3A/2A Source or Sink Current Power MOSFET Integrated Low Output Voltage Offset Current Limit Protection Thermal Shutdown Protection Adjusted Output by External Resistors Shutdown for Standby or Suspend Mode SOP-8, TO-252-5 and TO-263- |
|
|
|
|
Fitipower |
USB Dedicated Charging Port Controller ● Input Voltage Range from 4V to 6V. ● Fully Supports Quick Charge 2.0 specification: Class A: 5V/9V/12V Output Voltage. ● Supports USB DCP Shorting D+ Line to D- Line per USB Battery Charging Specification, Revision 1.2. ● Meets Chinese Telecommunic |
|
|
|
|
Fiti |
Synchronous Buck PWM over current protection. The output current is monitored by sensing the voltage drop across the RDS-ON of the low side MOSFET which eliminates the need for a current sensing resistor. This device is available in SOP-8 package. Features ● Operates fr |
|
|
|
|
Fiti |
3A BUS TERMINATION REGULATOR ● Peak 3A Source or Sink Current ● Power MOSFET Integrated ● Low Output Voltage Offset ● Built-in Soft-start ● Current Limiting Protection ● Thermal Shutdown Protection ● Adjustable Output by External Resistors ● Shutdown for Standby or Suspend Mode |
|
|
|
|
Fiti |
300mA Low Noise High PSRR LDO Low Dropout Voltage of 300mV at 200mA Low 30μVrms Output Noise Guaranteed 300mA Output Current High Power Supply Rejection Ratio of 70dB at 10kHz Very Low Quiescent Current at 35µA Max. 2% Output Voltage Accuracy Needs Only 1µF Capacit |
|
|
|
|
Fiti |
550KHz High Efficiency Low Ripple Synchronous Step-Up Converter High Efficiency up to 93% Low RDS(ON) Integrated Power MOSFET NMOS 80mΩ / PMOS120mΩ Wide Input Voltage Range: 2.5V to 5.5V Fixed 550KHz Switching Frequency Low-Power Mode for Light Load Conditions ±2.0% Voltage Reference Accuracy PMOS |
|
|
|
|
Fiti |
Termination Regulator ● Peak 2A Source or Sink Current ● Power MOSFET Integrated ● Low Output Voltage Offset ● Current Limiting Protection ● Thermal Shutdown Protection ● Adjusted Output by External Resistors ● Shutdown for Standby or Suspend Mode ● RoHS Compliant Applica |
|
|
|
|
Fiti |
2A Bus Termination Regulator ● 2A Source or Sink Current ● Power MOSFET Integrated ● Low Output Voltage Offset ● Current Limiting Protection ● Thermal Shutdown Protection ● Adjusted Output by External Resistors ● Shutdown for Standby or Suspend Mode ● RoHS Compliant Application |
|
|
|
|
Fitipower |
USB Dedicated Charging Port Controller ● Support HiSilicon Fast Charging Protocol (FCP) for Output Voltage and Current Communication ● Support Qualcomm® Quick ChargeTM 2.0/3.0 ● Class A : 3.6V up to 12V Output Voltage ● Class B : 3.6V up to 20V Output Voltage ● Automatic Selection FCP and |
|
|
|
|
Fitipower |
USB Dedicated Charging Port Controller ● Input Voltage Range from 4V to 6V. ● Fully Supports Quick Charge 2.0 specification: ● Class A: 5V/9V/12V Output Voltage. ● Class B : 5V/9V/12V/20V Output Voltage. ● Supports USB DCP Shorting D+ Line to D- Line per USB Battery Charging Specification |
|
|
|
|
Fiti |
550KHz High Efficiency Low Ripple Synchronous Step-Up Converter |
|
|
|
|
Fiti |
2A BUS TERMINATION REGULATOR ● 2A Source or Sink Current ● Power MOSFET Integrated ● Low Output Voltage Offset ● Current Limiting Protection ● Thermal Shutdown Protection ● Adjusted Output by External Resistors ● Shutdown for Standby or Suspend Mode ● RoHS Compliant Applications |
|
|
|
|
Fitipower |
Sunchronous Buck PWM DC-DC Controller over current protection. The output current is monitored by sensing the voltage drop across the RDS-ON of the low side MOSFET which eliminates the need for a current sensing resistor. This device is available in SOP-8 package. Features ● Operates fr |
|
|
|
|
Fiti |
Synchronous Buck PWM over current protection. The output current is monitored by sensing the voltage drop across the RDS-ON of the low side MOSFET which eliminates the need for a current sensing resistor. This device is available in SOP-8 package. Features ● Operates fr |
|
|
|
|
Fiti |
Synchronous Buck PWM DC-DC Controller over current protection. The output current is monitored by sensing the voltage drop across the RDS-ON of the low side MOSFET which eliminates the need for a current sensing resistor. This device is available in SOP-8 package. Features ● Operates fr |
|